WellplannerNorwegian shelf well data

Fields / 15/3-5

15/3-5

Exploration, appraisalPlugged and abandonedOil

Drilled by Elf Petroleum Norge AS with Byford Dolphin, 28.12.1983 to 13.05.1984 (137 days), to 4 130,0 m in the Sleipner Formation.

Water depth110,0 m
Total depth4 130,0 m MD
Vertical depth4 130,0 m TVD
Bottom-hole temperature115 °C
Max inclination-
Rotary table25,0 m
Formation at total depthSleipner Formation
RigByford Dolphin
Spud28.12.1983
Completed13.05.1984
OperatorElf Petroleum Norge AS
Position58,7870 N, 1,8428 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 135,0 mNordland GpHordaland Group, top 928,0 mHordaland GpRogaland Group, top 2 236,0 mRogaland GpShetland Group, top 2 803,0 mShetland GpCromer Knoll Group, top 3 623,0 mCromer Knoll GpViking Group, top 3 808,0 mVestland Group, top 3 935,0 mVestland GpFormationsUtsira Formation, top 702,0 mUtsira FmSkade Formation, top 1 129,0 mSkade FmGrid Formation, top 1 596,0 mGrid FmBalder Formation, top 2 236,0 mSele Formation, top 2 294,0 mHeimdal Formation, top 2 350,0 mHeimdal FmLista Formation, top 2 695,0 mTy Formation, top 2 757,0 mJorsalfare Formation, top 2 803,0 mJorsalfare FmKyrre Formation, top 3 063,0 mKyrre FmBlodøks Formation, top 3 401,0 mSvarte Formation, top 3 486,0 mSvarte FmRødby Formation, top 3 623,0 mÅsgard Formation, top 3 672,0 mÅsgard FmDraupne Formation, top 3 808,0 mHeather Formation, top 3 881,0 mSleipner Formation, top 3 935,0 mSleipner Fm1351 0002 0003 0004 0004 130

Temperature

Reported at total depth115 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
15/3-12 A3,64 037,0--2020
15/3-12 S3,63 810,0--2019
15/3-113,84 014,0132 °C1,782018
15/3-U-83,8530,0--2018
15/3-103,9990,0--2018
15/3-44,24 259,0139 °C1,551981
15/3-65,32 793,0-1,311998
15/3-95,54 654,0154 °C2,052010

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"196,036"196,0-
Surface casing20"962,026"977,01,28 LOT
Intermediate13 3/8"2 798,017 1/2"2 813,01,72 LOT
Intermediate9 5/8"3 816,012 1/4"3 832,0-
Open hole-4 130,08 1/2"4 130,0-

Mud weight

20 measurements, one dot each, 1,00 to 1,70 g/cm³ against measured depth, water based.

1,01,21,41,601 0002 0003 0004 000180,0 m: 1,03 g/cm³, WATER BASED210,0 m: 1,11 g/cm³, WATER BASED1 040,0 m: 1,15 g/cm³, WATER BASED1 170,0 m: 1,17 g/cm³, WATER BASED1 245,0 m: 1,18 g/cm³, WATER BASED1 530,0 m: 1,19 g/cm³, WATER BASED1 790,0 m: 1,21 g/cm³, WATER BASED2 160,0 m: 1,26 g/cm³, WATER BASED2 370,0 m: 1,26 g/cm³, WATER BASED2 605,0 m: 1,28 g/cm³, WATER BASED3 010,0 m: 1,29 g/cm³, WATER BASED3 070,0 m: 1,30 g/cm³, WATER BASED3 530,0 m: 1,33 g/cm³, WATER BASED3 660,0 m: 1,37 g/cm³, WATER BASED3 710,0 m: 1,41 g/cm³, WATER BASED3 740,0 m: 1,43 g/cm³, WATER BASED3 785,0 m: 1,45 g/cm³, WATER BASED3 850,0 m: 1,60 g/cm³, WATER BASED3 930,0 m: 1,61 g/cm³, WATER BASED3 970,0 m: 1,70 g/cm³, WATER BASED
Show on the mapOpen on FactPages ↗