WellplannerNorwegian shelf well data

Fields / Johan Sverdrup / 16/2-14

16/2-14

Exploration, appraisalPlugged and abandonedOil

Drilled by Statoil Petroleum AS with Ocean Vanguard in Johan Sverdrup, 14.09.2012 to 17.11.2012 (64 days), to 1 982,0 m in the Skagerrak Formation.

Water depth113,0 m
Total depth1 982,0 m MD
Vertical depth1 982,0 m TVD
Bottom-hole temperature85 °C
Max inclination4,8°
Rotary table22,0 m
Formation at total depthSkagerrak Formation
RigOcean Vanguard
Spud14.09.2012
Completed17.11.2012
OperatorStatoil Petroleum AS
Position58,8405 N, 2,5173 E

Formations

19 tops reported, measured depth in metres.

GroupsNordland Group, top 135,0 mNordland GpHordaland Group, top 985,0 mHordaland GpRogaland Group, top 1 474,0 mRogaland GpShetland Group, top 1 567,0 mShetland GpCromer Knoll Group, top 1 791,0 mCromer Knoll GpViking Group, top 1 856,5 mHegre Group, top 1 886,5 mHegre GpFormationsUtsira Formation, top 808,5 mUtsira FmUndifferentiated, top 902,0 mUndifferentiatedSkade Formation, top 985,0 mSkade FmUndifferentiated, top 1 120,0 mUndifferentiatedBalder Formation, top 1 474,0 mSele Formation, top 1 492,0 mLista Formation, top 1 520,0 mEkofisk Formation, top 1 567,0 mEkofisk FmRødby Formation, top 1 791,0 mÅsgard Formation, top 1 850,5 mIntra Draupne Fm Ss, top 1 856,5 mSkagerrak Formation, top 1 886,5 mSkagerrak Fm1355001 0001 5001 982

Temperature

Reported at total depth85 °C
Johan Sverdrup gradient43,0 °C/km
Estimated at total depth from the gradient83 °C

The gradient is the median of 20 released wells in Johan Sverdrup with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/2-U-140,01 050,0--2012
16/2-D-12,14 025,0--2023
16/2-D-22,15 586,0--2021
16/2-D-32,14 465,0--2023
16/2-D-42,14 160,0--2022
16/2-D-4 Y22,14 160,0--2025
16/2-D-52,15 806,0--2021
16/2-D-5 Y22,14 926,0--2026

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"198,036"198,0-
Surface casing20"608,026"608,01,51 LOT
Intermediate13 3/8"1 171,017 1/2"1 171,01,50 FIT
Intermediate9 5/8"1 569,012 1/4"1 570,01,58 LOT
Open hole-1 932,08 1/2"1 932,0-

Mud weight

21 measurements, one dot each, 1,00 to 1,60 g/cm³ against measured depth, kill fluid- sw/bentonite, obm-low ecd, pac re.

1,01,21,41,605001 0001 500135,0 m: 1,60 g/cm³, Kill Fluid- SW/Bentonite135,0 m: 1,03 g/cm³, PAC RE212,0 m: 1,03 g/cm³, PAC RE550,0 m: 1,34 g/cm³, OBM-Low ECD609,0 m: 1,60 g/cm³, Kill Fluid- SW/Bentonite615,0 m: 1,30 g/cm³, OBM-Low ECD617,0 m: 1,30 g/cm³, OBM-Low ECD676,0 m: 1,31 g/cm³, OBM-Low ECD811,0 m: 1,30 g/cm³, OBM-Low ECD887,0 m: 1,30 g/cm³, OBM-Low ECD996,0 m: 1,30 g/cm³, OBM-Low ECD1 010,0 m: 1,31 g/cm³, OBM-Low ECD1 076,0 m: 1,31 g/cm³, OBM-Low ECD1 107,0 m: 1,31 g/cm³, OBM-Low ECD1 120,0 m: 1,31 g/cm³, OBM-Low ECD1 183,0 m: 1,31 g/cm³, OBM-Low ECD1 210,0 m: 1,31 g/cm³, OBM-Low ECD1 290,0 m: 1,34 g/cm³, OBM-Low ECD1 570,0 m: 1,20 g/cm³, OBM-Low ECD1 904,0 m: 1,30 g/cm³, OBM-Low ECD1 982,0 m: 1,28 g/cm³, OBM-Low ECD
Show on the mapOpen on FactPages ↗