WellplannerNorwegian shelf well data

Fields / Johan Sverdrup / 16/2-22 S

16/2-22 S

Exploration, appraisalPlugged and abandonedOil

Drilled by Statoil Petroleum AS with Deepsea Atlantic in Johan Sverdrup, 16.01.2017 to 28.01.2017 (12 days), to 1 993,0 m in the Basement.

Water depth116,0 m
Total depth1 993,0 m MD
Vertical depth1 982,0 m TVD
Bottom-hole temperature85 °C
Max inclination9,8°
Rotary table30,0 m
Formation at total depthBasement
RigDeepsea Atlantic
Spud16.01.2017
Completed28.01.2017
OperatorStatoil Petroleum AS
Position58,9260 N, 2,4092 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 145,9 mNordland GpHordaland Group, top 919,0 mHordaland GpRogaland Group, top 1 642,5 mRogaland GpShetland Group, top 1 808,3 mShetland GpCromer Knoll Group, top 1 891,0 mViking Group, top 1 934,5 mBasement, top 1 950,3 mFormationsUtsira Formation, top 791,0 mUtsira FmSkade Formation, top 919,0 mSkade FmNo Formal Name, top 1 090,0 mNo Formal NameBalder Formation, top 1 642,5 mSele Formation, top 1 657,0 mLista Formation, top 1 690,6 mLista FmVåle Formation, top 1 799,2 mEkofisk Formation, top 1 808,3 mTor Formation, top 1 818,2 mHod Formation, top 1 855,2 mRødby Formation, top 1 891,0 mSola Formation, top 1 919,2 mÅsgard Formation, top 1 923,0 mDraupne Formation, top 1 934,5 m1465001 0001 5001 993

Temperature

Reported at total depth85 °C
Johan Sverdrup gradient43,0 °C/km
Estimated at total depth from the gradient83 °C

The gradient is the median of 20 released wells in Johan Sverdrup with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/2-22 A same well0,0----
16/2-20 A1,92 215,091 °C1,392013
16/2-20 S1,92 150,091 °C1,402013
16/2-9 S2,32 082,085 °C1,292011
16/2-243,11 977,0--2026
16/2-24 A3,12 110,0--2026
16/2-14,71 906,073 °C-1967
16/2-35,21 905,089 °C1,352007

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor36"195,542"200,0-
Intermediate13 3/8"1 208,317 1/2"1 214,01,42 FIT
Open hole-1 993,012 1/4"1 993,0-

Mud weight

9 measurements, one dot each, 1,20 to 1,25 g/cm³ against measured depth, bentonite/polymer mud, carbosea.

1,21,31,405001 0001 500200,0 m: 1,25 g/cm³, Bentonite/Polymer mud1 093,0 m: 1,25 g/cm³, CARBOSEA1 214,0 m: 1,25 g/cm³, Bentonite/Polymer mud1 214,0 m: 1,25 g/cm³, CARBOSEA1 312,0 m: 1,25 g/cm³, CARBOSEA1 833,0 m: 1,25 g/cm³, CARBOSEA1 911,0 m: 1,25 g/cm³, CARBOSEA1 943,0 m: 1,25 g/cm³, CARBOSEA1 993,0 m: 1,25 g/cm³, CARBOSEA
Show on the mapOpen on FactPages ↗