WellplannerNorwegian shelf well data

Fields / Solveig / 16/4-9 S

16/4-9 S

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with Bredford Dolphin in Solveig, 14.06.2015 to 16.08.2015 (63 days), to 2 358,0 m in the Skagerrak Formation.

Water depth100,0 m
Total depth2 358,0 m MD
Vertical depth2 330,0 m TVD
Bottom-hole temperature89 °C
Max inclination13,0°
Rotary table25,0 m
Formation at total depthSkagerrak Formation
RigBredford Dolphin
Spud14.06.2015
Completed16.08.2015
OperatorLundin Norway AS
Position58,7063 N, 2,1653 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 125,0 mNordland GpHordaland Group, top 983,5 mHordaland GpHordaland Group, top 1 245,0 mHordaland GpHordaland Group, top 1 670,0 mHordaland Group, top 1 707,5 mHordaland GpRogaland Group, top 1 871,0 mRogaland GpShetland Group, top 1 975,0 mHegre Group, top 1 983,5 mHegre GpFormationsUtsira Formation, top 735,0 mUtsira FmSkade Formation, top 995,0 mSkade FmGrid Formation, top 1 663,0 mGrid Formation, top 1 705,0 mGrid FmBalder Formation, top 1 871,0 mSele Formation, top 1 881,5 mLista Formation, top 1 911,0 mVåle Formation, top 1 969,0 mEkofisk Formation, top 1 975,0 mTor Formation, top 1 976,5 mHod Formation, top 1 982,0 mSkagerrak Formation, top 1 983,5 mSkagerrak Fm1255001 0001 5002 0002 358

Temperature

Reported at total depth89 °C
Drill-stem test at 2 001,9 m78 °C
Solveig gradient38,7 °C/km
Estimated at total depth from the gradient89 °C

The gradient is the median of 4 released wells in Solveig with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/4-121,42 171,086 °C1,372021
16/4-U-81,4---2021
16/4-13 S2,52 422,092 °C1,502021
16/4-BG-1 Y1H2,74 878,0--2025
16/4-BG-1 Y2H2,75 457,0--2025
16/4-U-102,8464,7--2023
16/4-U-23,1762,0--2019
16/4-BA-1 AH3,15 225,0--2021

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"203,236"207,5-
Surface casing20"602,526"609,01,55 FIT
Pilot hole-611,09 7/8"611,0-
Intermediate9 5/8"1 937,212 1/4"1 945,01,81 LOT
Liner7"2 096,28 1/2"2 096,2-
Open hole-2 358,08 1/2"2 358,0-

Mud weight

10 measurements, one dot each, 1,20 to 1,50 g/cm³ against measured depth, glydril, spud mud, water based.

1,21,31,41,505001 0001 5002 000207,5 m: 1,50 g/cm³, Glydril207,5 m: 1,40 g/cm³, Glydril611,0 m: 1,25 g/cm³, Spud Mud971,0 m: 1,35 g/cm³, Water Based1 409,0 m: 1,40 g/cm³, Water Based1 945,0 m: 1,20 g/cm³, Water Based1 945,0 m: 1,40 g/cm³, Water Based2 100,0 m: 1,20 g/cm³, Water Based2 358,0 m: 1,20 g/cm³, Water Based2 358,0 m: 1,20 g/cm³, Water Based

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 981,0 - 2 001,911,1-7813623 400
Show on the mapOpen on FactPages ↗