WellplannerNorwegian shelf well data

Fields / 2/5-6

2/5-6

Exploration, wildcatPlugged and abandonedOil and gas shows

Drilled by Amoco Norway Oil Company with Norskald, 14.05.1978 to 16.08.1978 (94 days), to 4 132,0 m in the Skagerrak Formation.

Water depth68,0 m
Total depth4 132,0 m MD
Vertical depth-
Bottom-hole temperature147 °C
Max inclination4,8°
Rotary table25,0 m
Formation at total depthSkagerrak Formation
RigNorskald
Spud14.05.1978
Completed16.08.1978
OperatorAmoco Norway Oil Company
Position56,5703 N, 3,6213 E

Formations

14 tops reported, measured depth in metres.

GroupsNordland Group, top 92,5 mNordland GpRogaland Group, top 2 910,0 mRogaland GpShetland Group, top 3 048,0 mShetland GpTyne Group, top 3 596,0 mTyne GpVestland Group, top 3 946,0 mVestland GpNo Group Defined, top 4 087,0 mFormationsBalder Formation, top 2 910,0 mSele Formation, top 2 923,0 mLista Formation, top 2 929,0 mVåle Formation, top 3 024,0 mEkofisk Formation, top 3 048,0 mTor Formation, top 3 151,0 mTor FmHod Formation, top 3 285,0 mHod FmSkagerrak Formation, top 4 087,0 m921 0002 0003 0004 0004 132

Temperature

Reported at total depth147 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
2/5-40,73 490,0155 °C1,671972
2/5-95,75 460,0167 °C1,981991
2/6-28,44 760,0-1,901980
2/6-59,03 260,0125 °C1,621996
2/5-310,93 731,0122 °C-1972
2/5-811,33 367,0132 °C1,631988
2/5-511,83 456,0107 °C-1972
2/8-212,03 246,089 °C1,721970

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"167,036"168,0-
Surface casing20"540,026"541,0-
Intermediate13 3/8"1 847,017 1/2"1 850,0-
Intermediate9 5/8"3 540,012 1/4"3 542,0-
Liner7"3 967,08 1/2"3 967,0-

Mud weight

13 measurements, one dot each, 1,00 to 2,13 g/cm³ against measured depth, gypsum, bentonit, brine/polym, seaw/ligno.

1,01,52,001 0002 0003 0004 000166,0 m: 1,01 g/cm³, bentonit550,0 m: 1,01 g/cm³, bentonit1 855,0 m: 1,13 g/cm³, Gypsum2 193,0 m: 1,55 g/cm³, Gypsum2 550,0 m: 1,61 g/cm³, Gypsum2 988,0 m: 1,66 g/cm³, seaw/ligno3 134,0 m: 1,66 g/cm³, seaw/ligno3 211,0 m: 1,70 g/cm³, seaw/ligno3 544,0 m: 1,68 g/cm³, seaw/ligno3 602,0 m: 1,70 g/cm³, seaw/ligno3 967,0 m: 1,98 g/cm³, brine/polym4 057,0 m: 2,13 g/cm³, brine/polym4 132,0 m: 2,13 g/cm³, brine/polym
Show on the mapOpen on FactPages ↗