WellplannerNorwegian shelf well data

Fields / Frigg / 25/1-1

25/1-1

Exploration, wildcatPlugged and abandonedOil and gas

Drilled by Elf Petroleum Norge AS with Pentagone 81 in Frigg, 30.03.1971 to 22.07.1971 (114 days), to 4 570,0 m in the Hugin Formation.

Water depth101,0 m
Total depth4 570,0 m MD
Vertical depth-
Bottom-hole temperature98 °C
Max inclination4,2°
Rotary table24,0 m
Formation at total depthHugin Formation
RigPentagone 81
Spud30.03.1971
Completed22.07.1971
OperatorElf Petroleum Norge AS
Position59,8882 N, 2,0785 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 125,0 mNordland GpHordaland Group, top 731,0 mHordaland GpRogaland Group, top 2 115,0 mRogaland GpShetland Group, top 2 711,0 mShetland GpCromer Knoll Group, top 3 995,0 mCromer Knoll GpViking Group, top 4 203,0 mViking GpVestland Group, top 4 560,0 mFormationsFrigg Formation, top 1 836,0 mFrigg FmBalder Formation, top 2 115,0 mIntra Balder Fm Ss, top 2 145,0 mHermod Formation, top 2 195,0 mSele Formation, top 2 218,0 mHermod Formation, top 2 227,5 mHeimdal Formation, top 2 245,0 mLista Formation, top 2 388,5 mLista FmJorsalfare Formation, top 2 711,0 mJorsalfare FmKyrre Formation, top 2 997,0 mKyrre FmTryggvason Formation, top 3 582,0 mTryggvason FmBlodøks Formation, top 3 790,0 mSvarte Formation, top 3 807,0 mSvarte FmRødby Formation, top 3 995,0 mSola Formation, top 4 065,0 mÅsgard Formation, top 4 135,0 mDraupne Formation, top 4 203,0 mHeather Formation, top 4 280,0 mHeather FmHugin Formation, top 4 560,0 m1251 0002 0003 0004 0004 590

Temperature

Reported at total depth98 °C
Frigg gradient23,0 °C/km
Estimated at total depth from the gradient106 °C

The gradient is the median of 7 released wells in Frigg with a reported bottom-hole temperature, counted from 4 °C at the sea floor. The vertical depth is not reported, so the measured depth is used and the estimate errs high.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/1-A-230,42 114,0--1977
25/1-A-220,42 930,0--1977
25/1-A-22 A0,42 424,0--1987
25/1-A-240,42 028,0--1977
25/1-A-210,42 047,0--1977
25/1-A-190,41 958,0--1977
25/1-A-200,41 924,0--1978
25/1-A-180,41 988,0--1977

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"165,036"165,0-
Surface casing20"459,026"490,0-
Intermediate13 3/8"1 835,017 1/2"1 846,0-
Intermediate9 5/8"2 950,012 1/4"2 960,0-
Production7"4 062,08 1/2"4 063,0-

Mud weight

6 measurements, one dot each, 1,20 to 1,90 g/cm³ against measured depth, waterbased.

1,21,41,61,801 0002 0003 0004 000490,0 m: 1,25 g/cm³, waterbased1 846,0 m: 1,30 g/cm³, waterbased2 371,0 m: 1,25 g/cm³, waterbased3 195,0 m: 1,65 g/cm³, waterbased4 029,0 m: 1,68 g/cm³, waterbased4 455,0 m: 1,90 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 920,0 - 1 928,0----674 000
Show on the mapOpen on FactPages ↗