WellplannerNorwegian shelf well data

Fields / Hanz / 25/10-16 A

25/10-16 A

Exploration, appraisalPlugged and abandonedGas

Drilled by Aker BP ASA with Maersk Intrepid in Hanz, 31.07.2018 to 09.08.2018 (9 days), to 3 704,0 m in the Skagerrak Formation.

Water depth116,5 m
Total depth3 704,0 m MD
Vertical depth2 592,0 m TVD
Bottom-hole temperature-
Max inclination60,3°
Rotary table55,0 m
Formation at total depthSkagerrak Formation
RigMaersk Intrepid
Spud31.07.2018
Completed09.08.2018
OperatorAker BP ASA
Position59,0370 N, 2,2282 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 171,5 mNordland GpHordaland Group, top 905,0 mHordaland GpHordaland Group, top 1 417,5 mHordaland GpHordaland Group, top 2 472,0 mHordaland GpRogaland Group, top 2 962,5 mRogaland GpShetland Group, top 3 290,5 mShetland GpViking Group, top 3 464,0 mViking GpVestland Group, top 3 612,5 mStatfjord Group, top 3 626,5 mHegre Group, top 3 652,5 mFormationsUtsira Formation, top 706,5 mUtsira FmSkade Formation, top 905,0 mSkade FmGrid Formation, top 2 221,0 mGrid FmBalder Formation, top 2 962,5 mSele Formation, top 3 041,0 mLista Formation, top 3 128,0 mHeimdal Formation, top 3 179,5 mLista Formation, top 3 213,5 mVåle Formation, top 3 258,5 mEkofisk Formation, top 3 290,5 mTor Formation, top 3 365,0 mDraupne Formation, top 3 464,0 mDraupne FmHeather Formation, top 3 610,0 mHugin Formation, top 3 612,5 mSkagerrak Formation, top 3 652,5 mNo Formal Name, top 3 679,5 mSkagerrak Formation, top 3 686,0 m1721 0002 0003 0003 716

Temperature

Reported at total depth-

1 released well in Hanz report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/10-16 B same well0,04 893,0-1,392018
25/10-16 C same well0,04 405,0-1,412018
25/10-16 S same well0,02 765,0106 °C1,302018
25/10-U-40,6----
25/10-U-50,6----
25/10-U-60,6----
25/10-U-70,6----
25/10-80,82 653,0-1,751997

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor22"208,526"219,0-
Intermediate13 3/8"552,717 1/2"560,01,59 LOT
Pilot hole-561,09 7/8"561,0-
Intermediate9 5/8"2 663,412 1/4"2 672,01,64 FIT
Open hole-3 704,08 1/2"3 704,0-

Mud weight

10 measurements, one dot each, 1,30 to 1,39 g/cm³ against measured depth, ems-4600, rheguard prime.

1,31,401 0002 0003 0001 847,0 m: 1,34 g/cm³, Rheguard Prime2 660,0 m: 1,38 g/cm³, Rheguard Prime2 672,0 m: 1,36 g/cm³, Rheguard Prime2 733,0 m: 1,34 g/cm³, Rheguard Prime2 765,0 m: 1,39 g/cm³, Rheguard Prime2 765,0 m: 1,30 g/cm³, EMS-46003 046,0 m: 1,34 g/cm³, Rheguard Prime3 675,0 m: 1,35 g/cm³, Rheguard Prime3 692,0 m: 1,34 g/cm³, Rheguard Prime3 704,0 m: 1,37 g/cm³, Rheguard Prime
Show on the mapOpen on FactPages ↗