WellplannerNorwegian shelf well data

Fields / Balder / 25/8-3

25/8-3

Exploration, appraisalPlugged and abandonedOil

Drilled by Esso Exploration and Production Norway A/S with Glomar Biscay Ii in Balder, 20.03.1981 to 17.04.1981 (28 days), to 1 868,0 m in the Ekofisk Formation.

Water depth130,0 m
Total depth1 868,0 m MD
Vertical depth-
Bottom-hole temperature50 °C
Max inclination1,8°
Rotary table25,0 m
Formation at total depthEkofisk Formation
RigGlomar Biscay Ii
Spud20.03.1981
Completed17.04.1981
OperatorEsso Exploration and Production Norway A/S
Position59,2726 N, 2,5217 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 155,0 mNordland GpHordaland Group, top 750,0 mHordaland GpRogaland Group, top 1 667,3 mRogaland GpShetland Group, top 1 840,6 mFormationsUtsira Formation, top 622,5 mUtsira FmNo Formal Name, top 700,0 mSkade Formation, top 750,0 mSkade FmNo Formal Name, top 945,0 mNo Formal NameSkade Formation, top 1 005,0 mNo Formal Name, top 1 031,0 mNo Formal NameBalder Formation, top 1 667,3 mBalder FmSele Formation, top 1 732,7 mHermod Formation, top 1 752,7 mSele Formation, top 1 767,0 mLista Formation, top 1 770,3 mHeimdal Formation, top 1 783,0 mLista Formation, top 1 786,5 mHeimdal Formation, top 1 794,3 mLista Formation, top 1 835,3 mEkofisk Formation, top 1 840,6 m1555001 0001 5001 871

Temperature

Reported at total depth50 °C
Balder gradient33,9 °C/km
Estimated at total depth from the gradient62 °C

The gradient is the median of 29 released wells in Balder with a reported bottom-hole temperature, counted from 4 °C at the sea floor. The vertical depth is not reported, so the measured depth is used and the estimate errs high.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/8-10 S0,81 890,083 °C1,431997
25/8-N-1 Y1H1,34 611,0--2026
25/8-N-1 Y2H1,3---2026
25/8-N-1 Y3H1,33 919,0--2026
25/11-U-432,6209,4--1999
25/11-U-412,6148,9--1999
25/11-U-422,6149,8--1999
25/11-U-402,7149,0--1999

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"218,036"219,0-
Intermediate13 3/8"487,017 1/2"502,01,77 LOT
Intermediate9 5/8"1 304,012 1/4"1 324,01,80 LOT
Open hole-1 868,08 1/2"1 868,0-

Mud weight

6 measurements, one dot each, 1,00 to 1,70 g/cm³ against measured depth, waterbased.

1,01,21,41,605001 0001 500260,0 m: 1,07 g/cm³, waterbased420,0 m: 1,08 g/cm³, waterbased800,0 m: 1,05 g/cm³, waterbased1 150,0 m: 1,06 g/cm³, waterbased1 460,0 m: 1,70 g/cm³, waterbased1 550,0 m: 1,60 g/cm³, waterbased
Show on the mapOpen on FactPages ↗