WellplannerNorwegian shelf well data

Fields / Veslefrikk / 30/3-5 S

30/3-5 S

Exploration, appraisalReclassified to developmentOil

Drilled by Den norske stats oljeselskap a.s with Veslefrikk A in Veslefrikk, 01.05.1992 to 19.06.1992 (49 days), to 4 724,0 m in the Statfjord Group.

Water depth175,0 m
Total depth4 724,0 m MD
Vertical depth3 340,0 m TVD
Bottom-hole temperature120 °C
Max inclination69,4°
Rotary table56,0 m
Formation at total depthStatfjord Group
RigVeslefrikk A
Spud01.05.1992
Completed19.06.1992
OperatorDen norske stats oljeselskap a.s
Position60,7827 N, 2,8980 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 231,0 mNordland GpHordaland Group, top 1 027,0 mHordaland GpRogaland Group, top 2 560,0 mRogaland GpShetland Group, top 3 004,0 mShetland GpViking Group, top 3 787,0 mViking GpBrent Group, top 4 050,0 mBrent GpDunlin Group, top 4 243,0 mDunlin GpStatfjord Group, top 4 538,0 mStatfjord GpFormationsUtsira Formation, top 807,0 mUtsira FmBalder Formation, top 2 560,0 mSele Formation, top 2 674,0 mLista Formation, top 2 717,0 mLista FmTarbert Formation, top 4 050,0 mNess Formation, top 4 059,0 mEtive Formation, top 4 127,0 mRannoch Formation, top 4 142,0 mOseberg Formation, top 4 155,0 mDrake Formation, top 4 243,0 mDrake FmCook Formation, top 4 424,0 mAmundsen Formation, top 4 494,0 mAmundsen Fm2311 0002 0003 0004 0004 724

Temperature

Reported at total depth120 °C
Veslefrikk gradient37,3 °C/km
Estimated at total depth from the gradient120 °C

The gradient is the median of 6 released wells in Veslefrikk with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/3-A-140,04 724,0--1992
30/3-A-14 A0,03 660,0--2004
30/3-A-180,03 819,0--1993
30/3-A-18 A0,03 510,0--1999
30/3-A-18 B0,04 126,0--2002
30/3-A-220,04 051,0--1995
30/3-A-22 A0,04 930,0--1995
30/3-A-22 B0,04 300,0--2007

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor26"463,030"464,0-
Intermediate20"1 153,024"1 409,01,65 LOT
Intermediate13 3/8"2 548,017 1/2"2 551,01,94 LOT
Intermediate9 5/8"3 955,012 1/4"3 956,01,62 LOT
Liner7"4 530,08 1/2"4 724,0-

Mud weight

16 measurements, one dot each, 1,10 to 1,62 g/cm³ against measured depth, oil based, water based.

1,11,21,31,41,51,61,701 0002 0003 0004 000510,0 m: 1,12 g/cm³, water based886,5 m: 1,18 g/cm³, water based1 327,0 m: 1,20 g/cm³, water based1 409,0 m: 1,20 g/cm³, water based1 752,0 m: 1,39 g/cm³, water based1 975,0 m: 1,60 g/cm³, water based2 524,0 m: 1,62 g/cm³, water based2 551,0 m: 1,61 g/cm³, oil based2 697,0 m: 1,62 g/cm³, oil based3 034,0 m: 1,62 g/cm³, oil based3 296,0 m: 1,62 g/cm³, oil based3 679,0 m: 1,61 g/cm³, oil based3 956,0 m: 1,55 g/cm³, oil based4 027,0 m: 1,20 g/cm³, oil based4 236,0 m: 1,23 g/cm³, oil based4 724,0 m: 1,23 g/cm³, oil based
Show on the mapOpen on FactPages ↗