WellplannerNorwegian shelf well data

Fields / Troll / 31/2-5 R2

31/2-5 R2

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by A/S Norske Shell with Borgny Dolphin in Troll, 22.03.1984 to 22.04.1984 (31 days), to 2 525,0 m in the Hegre Group.

Water depth333,0 m
Total depth2 525,0 m MD
Vertical depth2 525,0 m TVD
Bottom-hole temperature79 °C
Max inclination1,5°
Rotary table25,0 m
Formation at total depthHegre Group
RigBorgny Dolphin
Spud22.03.1984
Completed22.04.1984
OperatorA/S Norske Shell
Position60,7712 N, 3,4315 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 358,0 mNordland GpHordaland Group, top 781,0 mHordaland GpRogaland Group, top 1 338,0 mRogaland GpShetland Group, top 1 525,5 mViking Group, top 1 529,0 mViking GpBrent Group, top 1 949,5 mBrent GpDunlin Group, top 2 062,5 mDunlin GpStatfjord Group, top 2 397,0 mHegre Group, top 2 464,0 mFormationsNo Formal Name, top 781,0 mNo Formal Name, top 808,0 mNo Formal NameBalder Formation, top 1 338,0 mSele Formation, top 1 389,0 mLista Formation, top 1 418,5 mLista FmSognefjord Formation, top 1 529,0 mSognefjord FmHeather Formation, top 1 610,0 mHeather FmFensfjord Formation, top 1 685,5 mFensfjord FmKrossfjord Formation, top 1 782,0 mHeather Formation, top 1 853,0 mHeather FmDrake Formation, top 2 062,5 mDrake FmCook Formation, top 2 194,0 mCook FmAmundsen Formation, top 2 270,0 mJohansen Formation, top 2 301,0 mJohansen FmAmundsen Formation, top 2 380,0 mAmundsen Fm3585001 0001 5002 0002 5002 525

Temperature

Reported at total depth79 °C
Drill-stem test at 1 594,0 m66 °C
Troll gradient37,2 °C/km
Estimated at total depth from the gradient85 °C

The gradient is the median of 44 released wells in Troll with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/2-5 same well0,02 532,079 °C1,251980
31/2-5 R same well0,02 525,079 °C1,501981
31/2-F-4 AH0,53 320,0--1997
31/2-F-4 BY1H0,57 510,0--2013
31/2-F-4 BY2H0,57 461,0--2013
31/2-F-4 BY3H0,56 162,0--2013
31/2-F-4 H0,51 690,0--1997
31/2-F-6 AH0,53 916,0--1995

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"443,036"446,0-
Surface casing20"809,026"820,01,55 LOT
Intermediate13 3/8"1 470,017 1/2"1 480,01,60 LOT
Intermediate9 5/8"1 801,012 1/4"1 812,01,69 LOT
Open hole-2 525,08 1/2"2 525,0-

Mud weight

7 measurements, one dot each, 1,00 to 1,50 g/cm³ against measured depth, water based.

1,01,11,21,31,41,505001 0001 5002 0002 500500,0 m: 1,05 g/cm³, water based1 030,0 m: 1,21 g/cm³, water based1 510,0 m: 1,25 g/cm³, water based1 870,0 m: 1,50 g/cm³, water based1 940,0 m: 1,15 g/cm³, water based1 960,0 m: 1,25 g/cm³, water based2 110,0 m: 1,15 g/cm³, water based

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 591,0 - 1 594,050,8-66668125 584
Show on the mapOpen on FactPages ↗