WellplannerNorwegian shelf well data

Fields / Troll / 31/3-1

31/3-1

Exploration, appraisalPlugged and abandonedGas

Drilled by Den norske stats oljeselskap a.s with DEEPSEA BERGEN decom in Troll, 17.07.1983 to 13.10.1983 (88 days), to 2 374,0 m in the Hegre Group.

Water depth334,0 m
Total depth2 374,0 m MD
Vertical depth2 374,0 m TVD
Bottom-hole temperature73 °C
Max inclination2,2°
Rotary table23,0 m
Formation at total depthHegre Group
RigDEEPSEA BERGEN decom
Spud17.07.1983
Completed13.10.1983
OperatorDen norske stats oljeselskap a.s
Position60,7800 N, 3,7343 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 357,0 mNordland GpHordaland Group, top 531,0 mHordaland GpRogaland Group, top 931,0 mRogaland GpShetland Group, top 1 235,0 mCromer Knoll Group, top 1 273,0 mViking Group, top 1 320,0 mViking GpBrent Group, top 1 796,0 mDunlin Group, top 1 844,0 mDunlin GpStatfjord Group, top 2 105,0 mHegre Group, top 2 160,0 mHegre GpFormationsBalder Formation, top 931,0 mBalder FmSele Formation, top 1 038,0 mSele FmLista Formation, top 1 136,0 mLista FmVåle Formation, top 1 225,0 mRødby Formation, top 1 273,0 mDraupne Formation, top 1 320,0 mSognefjord Formation, top 1 351,5 mSognefjord FmHeather Formation, top 1 497,0 mFensfjord Formation, top 1 516,0 mFensfjord FmKrossfjord Formation, top 1 668,0 mKrossfjord FmHeather Formation, top 1 779,0 mDrake Formation, top 1 844,0 mDrake FmCook Formation, top 1 945,0 mAmundsen Formation, top 1 992,0 mJohansen Formation, top 2 001,0 mJohansen FmAmundsen Formation, top 2 088,0 mAmundsen Fm3575001 0001 5002 0002 374

Temperature

Reported at total depth73 °C
Troll gradient37,2 °C/km
Estimated at total depth from the gradient79 °C

The gradient is the median of 44 released wells in Troll with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/3-S-414,71 755,0--1998
31/2-K-21 AY1H5,85 080,0--2001
31/2-K-21 AY2H5,84 857,0--2001
31/2-K-21 BY1H5,85 740,0--2015
31/2-K-21 BY2H5,85 880,0--2015
31/2-K-21 BY3H5,85 653,0--2015
31/2-K-21 BY4H5,8----
31/2-K-21 H5,82 357,0--2001

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"421,036"422,0-
Surface casing20"849,026"865,01,55 LOT
Intermediate13 3/8"1 285,517 1/2"1 300,01,66 LOT
Intermediate9 5/8"1 815,512 1/4"1 835,01,65 LOT
Open hole-2 374,08 1/2"2 374,0-

Mud weight

5 measurements, one dot each, 1,00 to 1,30 g/cm³ against measured depth, seawater.

1,01,11,21,305001 0001 5002 000450,0 m: 1,07 g/cm³, seawater1 000,0 m: 1,08 g/cm³, seawater1 260,0 m: 1,28 g/cm³, seawater1 775,0 m: 1,30 g/cm³, seawater1 950,0 m: 1,12 g/cm³, seawater

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
21 373,0 - 1 383,012,7---479 000
11 519,0 - 1 529,016,9---355 000
Show on the mapOpen on FactPages ↗