WellplannerNorwegian shelf well data

Fields / Brage / 31/4-5

31/4-5

Exploration, appraisalPlugged and abandonedOil

Drilled by Norsk Hydro Produksjon AS with Nortrym in Brage, 27.05.1981 to 29.07.1981 (63 days), to 2 930,0 m in the Hegre Group.

Water depth143,0 m
Total depth2 930,0 m MD
Vertical depth-
Bottom-hole temperature82 °C
Max inclination2,5°
Rotary table25,0 m
Formation at total depthHegre Group
RigNortrym
Spud27.05.1981
Completed29.07.1981
OperatorNorsk Hydro Produksjon AS
Position60,5586 N, 3,0570 E

Formations

22 tops reported, measured depth in metres.

GroupsNordland Group, top 168,0 mNordland GpHordaland Group, top 911,0 mHordaland GpRogaland Group, top 1 772,0 mRogaland GpShetland Group, top 2 011,0 mCromer Knoll Group, top 2 050,0 mViking Group, top 2 060,0 mViking GpBrent Group, top 2 278,0 mDunlin Group, top 2 356,0 mDunlin GpStatfjord Group, top 2 645,0 mStatfjord GpHegre Group, top 2 849,0 mFormationsUtsira Formation, top 696,0 mUtsira FmBalder Formation, top 1 772,0 mSele Formation, top 1 824,0 mLista Formation, top 1 862,0 mLista FmVåle Formation, top 1 980,0 mDraupne Formation, top 2 060,0 mSognefjord Formation, top 2 070,0 mHeather Formation, top 2 078,0 mFensfjord Formation, top 2 104,0 mFensfjord FmDrake Formation, top 2 356,0 mDrake FmCook Formation, top 2 482,0 mAmundsen Formation, top 2 521,0 mAmundsen Fm1685001 0001 5002 0002 5002 930

Temperature

Reported at total depth82 °C
Brage gradient41,6 °C/km
Estimated at total depth from the gradient119 °C

The gradient is the median of 7 released wells in Brage with a reported bottom-hole temperature, counted from 4 °C at the sea floor. The vertical depth is not reported, so the measured depth is used and the estimate errs high.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/4-U-71,834,0--1987
31/4-U-91,826,0--1987
31/4-U-51,886,0--1987
31/4-U-21,894,0--1987
31/4-U-61,876,0--1987
31/4-A-221,86 890,0--2001
31/4-A-22 A1,88 727,0--2009
31/4-A-311,88 116,0--2004

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"257,536"259,0-
Surface casing20"911,026"925,01,71 LOT
Intermediate13 3/8"1 953,017 1/2"1 966,01,65 LOT
Intermediate9 5/8"2 570,012 1/4"2 585,01,65 LOT
Open hole-2 930,08 1/2"2 930,0-

Mud weight

8 measurements, one dot each, 1,00 to 1,41 g/cm³ against measured depth, waterbased.

1,01,11,21,31,41,505001 0001 5002 0002 500600,0 m: 1,06 g/cm³, waterbased1 000,0 m: 1,40 g/cm³, waterbased1 340,0 m: 1,41 g/cm³, waterbased1 630,0 m: 1,40 g/cm³, waterbased1 990,0 m: 1,35 g/cm³, waterbased2 180,0 m: 1,24 g/cm³, waterbased2 570,0 m: 1,24 g/cm³, waterbased2 890,0 m: 1,21 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
32 107,0 - 2 140,014,3--33428 000
22 130,0 - 2 133,014,3--39833 000
12 152,0 - 2 158,0-----
Show on the mapOpen on FactPages ↗