WellplannerNorwegian shelf well data

Fields / Troll / 31/6-5

31/6-5

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by Den norske stats oljeselskap a.s with DEEPSEA BERGEN decom in Troll, 16.03.1984 to 21.05.1984 (66 days), to 2 082,0 m in the Drake Formation.

Water depth304,0 m
Total depth2 082,0 m MD
Vertical depth2 028,0 m TVD
Bottom-hole temperature61 °C
Max inclination1,5°
Rotary table23,0 m
Formation at total depthDrake Formation
RigDEEPSEA BERGEN decom
Spud16.03.1984
Completed21.05.1984
OperatorDen norske stats oljeselskap a.s
Position60,6186 N, 3,8058 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 327,0 mNordland GpHordaland Group, top 455,0 mHordaland GpRogaland Group, top 816,0 mRogaland GpShetland Group, top 1 144,0 mShetland GpCromer Knoll Group, top 1 256,0 mCromer Knoll GpViking Group, top 1 388,0 mViking GpBrent Group, top 1 999,0 mDunlin Group, top 2 035,0 mFormationsBalder Formation, top 816,0 mBalder FmSele Formation, top 960,0 mSele FmLista Formation, top 1 080,0 mLista FmHardråde Formation, top 1 144,0 mUndifferentiated, top 1 157,0 mUndifferentiatedRødby Formation, top 1 256,0 mSola Formation, top 1 312,0 mÅsgard Formation, top 1 347,0 mDraupne Formation, top 1 388,0 mDraupne FmHeather Formation, top 1 480,0 mSognefjord Formation, top 1 518,0 mSognefjord FmHeather Formation, top 1 677,0 mFensfjord Formation, top 1 702,0 mFensfjord FmKrossfjord Formation, top 1 936,5 mHeather Formation, top 1 972,0 mHeather FmDrake Formation, top 2 035,0 m3275001 0001 5002 0002 082

Temperature

Reported at total depth61 °C
Troll gradient37,2 °C/km
Estimated at total depth from the gradient67 °C

The gradient is the median of 44 released wells in Troll with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/6-40,0820,037 °C1,091984
31/6-U-243,7----
31/6-U-205,2----
31/6-A-405,31 668,0--1997
31/6-A-375,32 708,0--1998
31/6-A-395,31 674,0--1997
31/6-A-365,31 612,5--1996
31/6-A-325,31 587,0--1997

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"389,236"390,5-
Surface casing20"649,026"656,01,54 LOT
Intermediate13 3/8"1 424,017 1/2"1 445,01,76 LOT
Intermediate9 5/8"1 706,912 1/4"1 721,01,62 LOT
Open hole-2 082,08 1/2"2 082,0-

Mud weight

9 measurements, one dot each, 1,00 to 1,26 g/cm³ against measured depth, water based.

1,01,11,21,305001 0001 5002 000430,0 m: 1,05 g/cm³, WATER BASED550,0 m: 1,07 g/cm³, WATER BASED660,0 m: 1,10 g/cm³, WATER BASED760,0 m: 1,22 g/cm³, WATER BASED1 065,0 m: 1,23 g/cm³, WATER BASED1 155,0 m: 1,22 g/cm³, WATER BASED1 260,0 m: 1,26 g/cm³, WATER BASED1 580,0 m: 1,22 g/cm³, WATER BASED1 725,0 m: 1,10 g/cm³, WATER BASED

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 558,0 - 1 568,038,1---1 266 000
Show on the mapOpen on FactPages ↗