WellplannerNorwegian shelf well data

Fields / Bestla / 31/7-1

31/7-1

Exploration, wildcatPlugged and abandonedOil and gas

Drilled by Faroe Petroleum Norge AS with Transocean Arctic in Bestla, 23.05.2016 to 22.06.2016 (30 days), to 2 780,0 m in the Johansen Formation.

Water depth118,6 m
Total depth2 780,0 m MD
Vertical depth2 780,0 m TVD
Bottom-hole temperature109 °C
Max inclination1,3°
Rotary table24,0 m
Formation at total depthJohansen Formation
RigTransocean Arctic
Spud23.05.2016
Completed22.06.2016
OperatorFaroe Petroleum Norge AS
Position60,4254 N, 3,0245 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 143,0 mNordland GpHordaland Group, top 837,0 mHordaland GpRogaland Group, top 1 835,0 mRogaland GpShetland Group, top 2 085,0 mViking Group, top 2 142,5 mViking GpBrent Group, top 2 373,0 mDunlin Group, top 2 449,0 mDunlin GpFormationsUtsira Formation, top 679,0 mUtsira FmNo Formal Name, top 837,0 mNo Formal NameBalder Formation, top 1 835,0 mSele Formation, top 1 905,0 mLista Formation, top 1 950,0 mLista FmVåle Formation, top 2 080,0 mHardråde Formation, top 2 085,0 mDraupne Formation, top 2 142,5 mSognefjord Formation, top 2 154,0 mFensfjord Formation, top 2 230,0 mFensfjord FmTarbert Formation, top 2 373,0 mNess Formation, top 2 390,0 mEtive Formation, top 2 415,0 mOseberg Formation, top 2 425,0 mDrake Formation, top 2 449,0 mDrake FmCook Formation, top 2 598,0 mAmundsen Formation, top 2 618,0 mAmundsen FmJohansen Formation, top 2 756,0 m1435001 0001 5002 0002 5002 786

Temperature

Reported at total depth109 °C

2 released wells in Bestla report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/7-1 A same well0,02 530,0-1,512016
31/7-B-1 AY1H1,65 678,0--2025
31/7-B-1 AY2H1,64 866,0--2025
31/7-B-1 H1,64 356,0--2025
31/7-U-11,6983,0--2024
31/7-B-2 H1,66 070,0--2025
31/7-2 A2,42 723,0-1,512017
31/7-2 S2,42 450,092 °C1,502017

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"209,036"209,0-
Surface casing13 3/8"902,017 1/2"908,01,70 FIT
Pilot hole-908,09 7/8"908,0-
Intermediate9 5/8"2 107,012 1/4"2 115,01,67 LOT
Open hole-2 780,08 1/2"2 780,0-

Mud weight

9 measurements, one dot each, 1,20 to 1,40 g/cm³ against measured depth, kcl/polymer/gem, kcl/polymer/gem, kcl/polymer/glycol.

1,21,31,405001 0001 5002 0002 500854,0 m: 1,40 g/cm³, KCL/Polymer/GEM1 009,0 m: 1,40 g/cm³, KCL/Polymer/GEM2 000,0 m: 1,40 g/cm³, KCL/Polymer/GEM2 000,0 m: 1,25 g/cm³, KCL/Polymer/GEM2 280,0 m: 1,24 g/cm³, KCL/POLYMER/GEM2 481,0 m: 1,25 g/cm³, KCl/Polymer/Glycol2 674,0 m: 1,24 g/cm³, KCL/POLYMER/GEM2 780,0 m: 1,25 g/cm³, KCl/Polymer/Glycol2 780,0 m: 1,24 g/cm³, KCl/Polymer/Glycol
Show on the mapOpen on FactPages ↗