WellplannerNorwegian shelf well data

Fields / Gullfaks / 34/10-14

34/10-14

Exploration, appraisalPlugged and abandonedOil

Drilled by Den norske stats oljeselskap a.s with Ross Rig (1) in Gullfaks, 24.12.1981 to 19.03.1982 (85 days), to 2 647,0 m in the Hegre Group.

Water depth227,0 m
Total depth2 647,0 m MD
Vertical depth-
Bottom-hole temperature98 °C
Max inclination-
Rotary table25,0 m
Formation at total depthHegre Group
RigRoss Rig (1)
Spud24.12.1981
Completed19.03.1982
OperatorDen norske stats oljeselskap a.s
Position61,2335 N, 2,2552 E

Formations

18 tops reported, measured depth in metres.

GroupsNordland Group, top 252,0 mNordland GpHordaland Group, top 953,0 mHordaland GpRogaland Group, top 1 554,0 mRogaland GpShetland Group, top 1 729,0 mShetland GpBrent Group, top 1 908,0 mBrent GpDunlin Group, top 2 080,0 mDunlin GpStatfjord Group, top 2 372,0 mStatfjord GpHegre Group, top 2 596,0 mFormationsUtsira Formation, top 926,0 mUtsira FmBalder Formation, top 1 554,0 mLista Formation, top 1 621,0 mLista FmNess Formation, top 1 908,0 mEtive Formation, top 1 976,0 mRannoch Formation, top 2 003,0 mBroom Formation, top 2 069,0 mDrake Formation, top 2 080,0 mCook Formation, top 2 159,0 mAmundsen Formation, top 2 203,0 mAmundsen Fm2525001 0001 5002 0002 5002 647

Temperature

Reported at total depth98 °C
Gullfaks gradient34,7 °C/km
Estimated at total depth from the gradient87 °C

The gradient is the median of 18 released wells in Gullfaks with a reported bottom-hole temperature, counted from 4 °C at the sea floor. The vertical depth is not reported, so the measured depth is used and the estimate errs high.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/10-61,82 363,063 °C1,791979
34/10-92,02 200,064 °C1,821980
34/10-9 R2,02 421,095 °C1,691980
34/10-262,1600,026 °C1,141985
34/10-U-82,2---1989
34/10-C-472,34 399,0--2005
34/10-C-47 A2,34 681,0--2023
34/10-C-332,32 295,0--1996

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"313,036"314,0-
Surface casing20"785,026"800,01,80 LOT
Intermediate13 3/8"1 554,017 1/2"1 568,01,85 LOT
Intermediate9 5/8"1 799,012 1/4"1 810,01,93 LOT
Liner7"2 297,08 1/2"2 300,02,38 LOT
Open hole-2 647,06"2 647,0-

Mud weight

7 measurements, one dot each, 1,00 to 1,80 g/cm³ against measured depth, waterbased.

1,01,21,41,61,805001 0001 5002 0002 500365,0 m: 1,07 g/cm³, waterbased830,0 m: 1,15 g/cm³, waterbased1 340,0 m: 1,30 g/cm³, waterbased1 570,0 m: 1,50 g/cm³, waterbased1 810,0 m: 1,72 g/cm³, waterbased1 930,0 m: 1,80 g/cm³, waterbased2 320,0 m: 1,64 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 934,0 - 1 937,012,7--85081 000
Show on the mapOpen on FactPages ↗