WellplannerNorwegian shelf well data

Fields / Kvitebjørn / 34/11-3

34/11-3

Exploration, appraisalPlugged and abandonedGas and condensate

Drilled by Den norske stats oljeselskap a.s with Deepsea Trym in Kvitebjørn, 01.08.1996 to 16.01.1997 (168 days), to 4 482,0 m in the Statfjord Group.

Water depth208,0 m
Total depth4 482,0 m MD
Vertical depth4 476,0 m TVD
Bottom-hole temperature162 °C
Max inclination7,0°
Rotary table25,0 m
Formation at total depthStatfjord Group
RigDeepsea Trym
Spud01.08.1996
Completed16.01.1997
OperatorDen norske stats oljeselskap a.s
Position61,0959 N, 2,5185 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 233,0 mNordland GpHordaland Group, top 986,0 mHordaland GpRogaland Group, top 1 904,0 mRogaland GpShetland Group, top 2 118,0 mShetland GpCromer Knoll Group, top 3 771,0 mCromer Knoll GpViking Group, top 3 960,0 mBrent Group, top 4 035,0 mBrent GpDunlin Group, top 4 197,0 mDunlin GpStatfjord Group, top 4 471,0 mFormationsUtsira Formation, top 912,0 mUtsira FmBalder Formation, top 1 904,0 mSele Formation, top 1 959,0 mLista Formation, top 1 964,0 mLista FmDraupne Formation, top 3 960,0 mHeather Formation, top 4 010,0 mTarbert Formation, top 4 035,0 mNess Formation, top 4 050,0 mEtive Formation, top 4 140,0 mRannoch Formation, top 4 155,0 mDrake Formation, top 4 197,0 mCook Formation, top 4 261,0 mBurton Formation, top 4 304,0 mAmundsen Formation, top 4 360,0 m2331 0002 0003 0004 0004 501

Temperature

Reported at total depth162 °C

2 released wells in Kvitebjørn report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/11-12,04 580,0165 °C2,011994
34/11-A-162,05 365,0--2014
34/11-A-16 A2,05 666,0--2015
34/11-A-16 B2,07 316,0--2023
34/11-A-152,05 568,0--2004
34/11-A-82,01 133,0--2003
34/11-A-142,04 785,0--2004
34/11-A-72,05 415,0--2010

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"293,036"293,0-
Surface casing20"1 089,026"1 115,01,66 LOT
Intermediate13 3/8"3 465,017 1/2"3 477,01,98 LOT
Intermediate9 5/8"3 972,012 1/4"3 985,02,10 LOT
Open hole-4 230,08 1/2"4 230,0-

Mud weight

19 measurements, one dot each, 1,20 to 2,00 g/cm³ against measured depth, anco 2000, ancotemp/bent., bentonite/fw, kcl/pac/xanvis.

1,21,41,61,82,001 0002 0003 0004 0001 115,0 m: 1,20 g/cm³, BENTONITE/FW1 175,0 m: 1,39 g/cm³, KCL/PAC/XANVIS1 649,0 m: 1,39 g/cm³, KCL/PAC/XANVIS1 765,0 m: 1,39 g/cm³, KCL/PAC/XANVIS2 217,0 m: 1,53 g/cm³, KCL/PAC/XANVIS2 980,0 m: 1,53 g/cm³, ANCO 20003 477,0 m: 1,55 g/cm³, ANCO 20003 477,0 m: 1,55 g/cm³, ANCO 20003 985,0 m: 1,87 g/cm³, ANCO 20004 022,0 m: 1,98 g/cm³, ANCOTEMP/BENT.4 034,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 039,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 040,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 054,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 071,5 m: 2,00 g/cm³, ANCOTEMP/BENT.4 078,5 m: 2,00 g/cm³, ANCOTEMP/BENT.4 085,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 230,0 m: 2,00 g/cm³, ANCOTEMP/BENT.4 482,0 m: 2,00 g/cm³, ANCOTEMP/BENT.
Show on the mapOpen on FactPages ↗