WellplannerNorwegian shelf well data

Fields / 34/2-5 S

34/2-5 S

Exploration, wildcatPlugged and abandonedDry

Drilled by Aker BP ASA with Transocean Arctic, 28.02.2018 to 31.03.2018 (31 days), to 3 680,0 m in the Lunde Formation.

Water depth389,0 m
Total depth3 680,0 m MD
Vertical depth3 617,0 m TVD
Bottom-hole temperature-
Max inclination23,8°
Rotary table24,0 m
Formation at total depthLunde Formation
RigTransocean Arctic
Spud28.02.2018
Completed31.03.2018
OperatorAker BP ASA
Position61,7595 N, 2,5859 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 412,0 mNordland GpHordaland Group, top 1 464,0 mHordaland GpRogaland Group, top 1 882,0 mRogaland GpShetland Group, top 2 000,0 mShetland GpCromer Knoll Group, top 3 370,0 mDunlin Group, top 3 407,0 mStatfjord Group, top 3 451,0 mStatfjord GpHegre Group, top 3 568,0 mHegre GpFormationsUndifferentiated, top 412,0 mUndifferentiatedUtsira Formation, top 1 290,0 mUtsira FmUndifferentiated, top 1 464,0 mGrid Formation, top 1 553,0 mUndifferentiated, top 1 573,0 mUndifferentiatedBalder Formation, top 1 882,0 mSele Formation, top 1 915,0 mLista Formation, top 1 962,0 mJorsalfare Formation, top 2 000,0 mJorsalfare FmKyrre Formation, top 2 198,0 mKyrre FmTryggvason Formation, top 3 247,0 mTryggvason FmRødby Formation, top 3 370,0 mSola Formation, top 3 389,0 mMime Formation, top 3 396,0 mMime FmLunde Formation, top 3 568,0 mLunde Fm4121 0002 0003 0003 680

Temperature

Reported at total depth-

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/5-1 A1,94 416,0-1,852010
34/5-1 S1,93 900,0135 °C1,852010
34/2-22,2513,0-1,071980
34/2-2 R2,24 074,0120 °C1,631980
34/2-12,5807,024 °C1,191979
34/2-43,94 107,0134 °C1,771985
34/5-2 S5,33 711,0-1,812018
34/2-35,53 742,0117 °C1,841981

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"473,536"473,5-
Surface casing20"898,026"906,01,45 FIT
Intermediate13 5/8"2 049,017 1/2"2 068,01,72 FIT
Liner9 5/8"3 387,012 1/4"3 389,02,08 FIT
Open hole-3 680,08 1/2"3 680,0-

Mud weight

15 measurements, one dot each, 1,20 to 1,80 g/cm³ against measured depth, cmc based wbm, ems 4600, ems-4600, warp.

1,21,41,61,801 0002 0003 000730,0 m: 1,24 g/cm³, CMC based WBM850,0 m: 1,29 g/cm³, EMS 4600906,0 m: 1,29 g/cm³, EMS-4600906,0 m: 1,29 g/cm³, CMC based WBM1 933,0 m: 1,35 g/cm³, EMS-46002 068,0 m: 1,37 g/cm³, EMS-46002 068,0 m: 1,49 g/cm³, EMS-46002 400,0 m: 1,37 g/cm³, EMS 46002 512,0 m: 1,53 g/cm³, EMS-46003 349,0 m: 1,62 g/cm³, EMS-46003 389,0 m: 1,80 g/cm³, Warp3 389,0 m: 1,64 g/cm³, EMS-46003 481,0 m: 1,79 g/cm³, Warp3 680,0 m: 1,79 g/cm³, Warp3 680,0 m: 1,79 g/cm³, Warp
Show on the mapOpen on FactPages ↗