WellplannerNorwegian shelf well data

Fields / Visund / 34/8-15 S

34/8-15 S

Exploration, appraisalPlugged and abandonedGas

Drilled by Statoil Petroleum AS with COSLPioneer in Visund, 03.01.2013 to 19.02.2013 (47 days), to 3 690,0 m in the Drake Formation.

Water depth378,0 m
Total depth3 690,0 m MD
Vertical depth3 046,0 m TVD
Bottom-hole temperature-
Max inclination67,4°
Rotary table25,0 m
Formation at total depthDrake Formation
RigCOSLPioneer
Spud03.01.2013
Completed19.02.2013
OperatorStatoil Petroleum AS
Position61,4350 N, 2,5891 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 403,0 mNordland GpHordaland Group, top 1 164,5 mHordaland GpRogaland Group, top 1 802,0 mRogaland GpShetland Group, top 2 025,0 mShetland GpCromer Knoll Group, top 3 427,0 mViking Group, top 3 439,0 mBrent Group, top 3 465,0 mBrent GpDunlin Group, top 3 649,0 mFormationsUtsira Formation, top 1 114,0 mUtsira FmBalder Formation, top 1 802,0 mSele Formation, top 1 860,5 mLista Formation, top 1 885,0 mLista FmKyrre Formation, top 2 025,0 mKyrre FmTryggvason Formation, top 3 340,0 mÅsgard Formation, top 3 427,0 mDraupne Formation, top 3 439,0 mTarbert Formation, top 3 465,0 mNess Formation, top 3 478,0 mEtive Formation, top 3 507,0 mRannoch Formation, top 3 546,0 mDrake Formation, top 3 649,0 m4031 0002 0003 0003 690

Temperature

Reported at total depth-
Visund gradient39,6 °C/km
Estimated at total depth from the gradient109 °C

The gradient is the median of 12 released wells in Visund with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/8-C-4 AH0,05 168,0--2013
34/8-C-4 H0,03 522,0--2013
34/8-17 S0,04 587,0-1,782014
34/8-C-1 AH0,04 626,0--2014
34/8-C-1 H0,03 530,0--2014
34/8-C-3 AH0,05 078,0--2013
34/8-C-3 BH0,04 700,0--2023
34/8-C-3 H0,03 456,0--2013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"490,036"495,0-
Surface casing20"1 257,026"1 300,01,52 FIT
Intermediate13 3/8"2 069,017 1/2"2 070,01,72 FIT
Intermediate9 5/8"2 697,012 1/4"2 700,01,79 FIT
Open hole-3 690,08 1/2"3 690,0-

Mud weight

12 measurements, one dot each, 1,30 to 1,62 g/cm³ against measured depth, enviromul yellow, kcl/polymer, performadril.

1,31,41,51,61,701 0002 0003 000448,0 m: 1,50 g/cm³, KCl/Polymer1 297,0 m: 1,39 g/cm³, Performadril2 078,0 m: 1,50 g/cm³, Enviromul Yellow2 132,0 m: 1,55 g/cm³, Enviromul Yellow2 400,0 m: 1,50 g/cm³, Enviromul Yellow2 450,0 m: 1,62 g/cm³, Enviromul Yellow2 707,0 m: 1,50 g/cm³, Enviromul Yellow3 018,0 m: 1,57 g/cm³, Enviromul Yellow3 130,0 m: 1,62 g/cm³, Enviromul Yellow3 230,0 m: 1,60 g/cm³, Enviromul Yellow3 521,0 m: 1,62 g/cm³, Enviromul Yellow3 690,0 m: 1,62 g/cm³, Enviromul Yellow
Show on the mapOpen on FactPages ↗