WellplannerNorwegian shelf well data

Fields / Maria / 6406/3-8

6406/3-8

Exploration, wildcatPlugged and abandonedOil

Drilled by Wintershall Norge ASA with Songa Delta in Maria, 16.05.2010 to 10.08.2010 (86 days), to 4 216,0 m in the Tilje Formation.

Water depth303,0 m
Total depth4 216,0 m MD
Vertical depth4 138,0 m TVD
Bottom-hole temperature-
Max inclination21,6°
Rotary table29,0 m
Formation at total depthTilje Formation
RigSonga Delta
Spud16.05.2010
Completed10.08.2010
OperatorWintershall Norge ASA
Position64,9359 N, 6,9426 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 332,0 mNordland GpHordaland Group, top 1 850,0 mHordaland GpRogaland Group, top 2 299,0 mShetland Group, top 2 424,0 mShetland GpCromer Knoll Group, top 3 244,0 mCromer Knoll GpViking Group, top 3 783,0 mFangst Group, top 3 841,0 mFangst GpBåt Group, top 4 041,0 mBåt GpFormationsNaust Formation, top 332,0 mNaust FmKai Formation, top 1 485,0 mKai FmBrygge Formation, top 1 850,0 mBrygge FmTare Formation, top 2 299,0 mTang Formation, top 2 358,0 mSpringar Formation, top 2 424,0 mSpringar FmNise Formation, top 2 586,0 mNise FmKvitnos Formation, top 2 777,0 mKvitnos FmLysing Formation, top 3 244,0 mLange Formation, top 3 303,0 mLange FmSpekk Formation, top 3 783,0 mMelke Formation, top 3 795,0 mGarn Formation, top 3 841,0 mNot Formation, top 3 940,0 mIle Formation, top 3 976,0 mRor Formation, top 4 041,0 mTilje Formation, top 4 166,0 m3321 0002 0003 0004 0004 216

Temperature

Reported at total depth-

1 released well in Maria report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6406/3-U-30,0570,0--2010
6406/3-U-20,01 033,0--2010
6406/3-I-1 H1,36 504,0--2024
6406/3-I-2 H1,36 167,0--2024
6406/3-I-5 H1,36 794,0--2024
6406/3-I-4 H1,36 561,0--2024
6406/3-U-71,4324,1--2014
6406/3-H-1 H1,46 668,0--2017

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"397,036"398,0-
Surface casing20"541,026"544,0-
Pilot hole-545,09 5/8"545,0-
Liner16"1 692,020"1 698,0-
Intermediate13 3/8"2 280,017 1/2"2 327,0-
Intermediate9 5/8"3 803,012 1/4"3 805,0-
Open hole-4 216,08 1/2"4 216,0-

Mud weight

22 measurements, one dot each, 1,00 to 1,72 g/cm³ against measured depth, aquacol kcl/polymer/glycol, carbo tech, spud mud.

1,01,21,41,61,801 0002 0003 0004 000368,0 m: 1,06 g/cm³, SPUD MUD544,0 m: 1,07 g/cm³, SPUD MUD672,0 m: 1,21 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 277,0 m: 1,26 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 654,0 m: 1,60 g/cm³, CARBO TECH1 694,0 m: 1,27 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 700,0 m: 1,31 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 808,0 m: 1,60 g/cm³, CARBO TECH1 918,0 m: 1,67 g/cm³, CARBO TECH1 964,0 m: 1,33 g/cm³, AQUACOL KCL/POLYMER/GLYCOL2 054,0 m: 1,63 g/cm³, CARBO TECH2 135,0 m: 1,33 g/cm³, AQUACOL KCL/POLYMER/GLYCOL2 180,0 m: 1,63 g/cm³, CARBO TECH2 280,0 m: 1,67 g/cm³, CARBO TECH2 327,0 m: 1,63 g/cm³, CARBO TECH2 828,0 m: 1,72 g/cm³, CARBO TECH3 647,0 m: 1,22 g/cm³, CARBO TECH3 805,0 m: 1,72 g/cm³, CARBO TECH3 846,0 m: 1,20 g/cm³, CARBO TECH3 928,0 m: 1,23 g/cm³, CARBO TECH3 997,0 m: 1,20 g/cm³, CARBO TECH4 216,0 m: 1,21 g/cm³, CARBO TECH
Show on the mapOpen on FactPages ↗