WellplannerNorwegian shelf well data

Fields / 6406/6-4 S

6406/6-4 S

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by Maersk Oil Norway AS with Leiv Eiriksson, 11.08.2015 to 30.10.2015 (80 days), to 4 484,0 m in the Tilje Formation.

Water depth261,0 m
Total depth4 484,0 m MD
Vertical depth4 468,0 m TVD
Bottom-hole temperature165 °C
Max inclination10,5°
Rotary table25,0 m
Formation at total depthTilje Formation
RigLeiv Eiriksson
Spud11.08.2015
Completed30.10.2015
OperatorMaersk Oil Norway AS
Position64,6419 N, 6,7672 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 286,0 mNordland GpHordaland Group, top 1 788,0 mHordaland GpRogaland Group, top 2 357,0 mShetland Group, top 2 489,0 mShetland GpCromer Knoll Group, top 3 335,0 mCromer Knoll GpViking Group, top 3 971,0 mFangst Group, top 4 006,0 mFangst GpBåt Group, top 4 254,0 mBåt GpFormationsUndifferentiated, top 286,0 mUndifferentiatedKai Formation, top 1 404,0 mKai FmBrygge Formation, top 1 788,0 mBrygge FmTare Formation, top 2 357,0 mTang Formation, top 2 415,0 mSpringar Formation, top 2 489,0 mSpringar FmNise Formation, top 2 636,0 mNise FmKvitnos Formation, top 2 885,0 mKvitnos FmLysing Formation, top 3 335,0 mLange Formation, top 3 340,0 mLange FmLyr Formation, top 3 957,0 mSpekk Formation, top 3 971,0 mMelke Formation, top 3 980,0 mGarn Formation, top 4 006,0 mNot Formation, top 4 109,0 mIle Formation, top 4 153,0 mRor Formation, top 4 254,0 mTofte Formation, top 4 306,0 mRor Formation, top 4 339,0 mTilje Formation, top 4 430,0 m2861 0002 0003 0004 0004 484

Temperature

Reported at total depth165 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6406/6-4 same well0,01 955,0-1,552015
6406/6-U-10,01 365,0--2015
6406/6-7 S5,34 057,0--2024
6406/6-6 A6,54 869,0-1,872018
6406/6-6 S6,54 911,0175 °C1,882018
6406/6-5 S6,5381,0-1,032018
6406/5-18,24 692,0165 °C1,972001
6406/6-110,34 715,0-1,811985

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor36"374,042"374,0-
Surface casing20"1 356,026"1 364,0-
Intermediate16"1 961,017 1/2"1 995,0-
Intermediate13 5/8"2 592,014 1/2"2 599,0-
Liner9 7/8"3 958,012 1/4"3 966,0-
Open hole-4 484,08 1/2"4 484,0-

Mud weight

9 measurements, one dot each, 1,00 to 1,88 g/cm³ against measured depth, glydril, oil based, seawater, water based.

1,01,21,41,61,801 0002 0003 0004 000863,0 m: 1,03 g/cm³, Seawater1 364,0 m: 1,20 g/cm³, GLYDRIL1 538,0 m: 1,40 g/cm³, WATER BASED1 947,0 m: 1,60 g/cm³, WATER BASED2 604,0 m: 1,76 g/cm³, OIL BASED3 584,0 m: 1,80 g/cm³, OIL BASED3 742,0 m: 1,76 g/cm³, OIL BASED3 768,0 m: 1,86 g/cm³, OIL BASED3 965,0 m: 1,88 g/cm³, OIL BASED
Show on the mapOpen on FactPages ↗