WellplannerNorwegian shelf well data

Fields / Tyrihans / 6407/1-2

6407/1-2

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by Den norske stats oljeselskap a.s with Dyvi Delta in Tyrihans, 13.11.1982 to 15.05.1983 (183 days), to 4 560,0 m in the Grey Beds (informal).

Water depth273,0 m
Total depth4 560,0 m MD
Vertical depth4 558,0 m TVD
Bottom-hole temperature159 °C
Max inclination5,0°
Rotary table29,0 m
Formation at total depthGrey Beds (informal)
RigDyvi Delta
Spud13.11.1982
Completed15.05.1983
OperatorDen norske stats oljeselskap a.s
Position64,7974 N, 7,0399 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 302,0 mNordland GpHordaland Group, top 1 690,0 mHordaland GpRogaland Group, top 2 189,0 mShetland Group, top 2 320,0 mShetland GpCromer Knoll Group, top 3 048,0 mCromer Knoll GpViking Group, top 3 526,0 mFangst Group, top 3 658,5 mFangst GpBåt Group, top 3 907,0 mBåt GpGrey Beds (informal), top 4 548,0 mFormationsNaust Formation, top 302,0 mNaust FmKai Formation, top 1 419,0 mKai FmBrygge Formation, top 1 690,0 mBrygge FmTare Formation, top 2 189,0 mTang Formation, top 2 253,0 mSpringar Formation, top 2 320,0 mNise Formation, top 2 403,0 mNise FmKvitnos Formation, top 2 900,0 mKvitnos FmLysing Formation, top 3 048,0 mLange Formation, top 3 082,0 mLange FmLyr Formation, top 3 510,0 mSpekk Formation, top 3 526,0 mMelke Formation, top 3 575,0 mGarn Formation, top 3 658,5 mNot Formation, top 3 771,0 mIle Formation, top 3 815,0 mRor Formation, top 3 907,0 mRor FmTilje Formation, top 4 050,0 mTilje FmÅre Formation, top 4 220,0 mÅre Fm3021 0002 0003 0004 0004 578

Temperature

Reported at total depth159 °C
Drill-stem test at 3 669,0 m134 °C
Tyrihans gradient37,2 °C/km
Estimated at total depth from the gradient162 °C

The gradient is the median of 4 released wells in Tyrihans with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/1-10,0900,027 °C1,081982
6407/1-C-3 AY1H1,66 549,0--2010
6407/1-C-3 AY2H1,65 890,0--2010
6407/1-C-3 Y1H1,64 557,0--2009
6407/1-C-2 AY1H1,65 601,0--2009
6407/1-C-2 AY2H1,66 185,0--2009
6407/1-C-2 H1,64 611,0--2009
6407/1-C-4 H1,6----

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"400,036"401,0-
Surface casing20"901,026"901,0-
Intermediate13 3/8"1 789,017 1/2"1 817,01,88 LOT
Intermediate9 5/8"3 568,012 1/4"3 568,02,03 LOT
Liner7"3 969,08 1/2"3 969,01,88 LOT
Open hole-4 560,07"4 560,0-

Mud weight

10 measurements, one dot each, 1,00 to 1,71 g/cm³ against measured depth, seawater, waterbased.

1,01,21,41,61,801 0002 0003 0004 000520,0 m: 1,09 g/cm³, seawater1 100,0 m: 1,14 g/cm³, waterbased1 425,0 m: 1,14 g/cm³, waterbased1 650,0 m: 1,22 g/cm³, waterbased1 980,0 m: 1,40 g/cm³, waterbased2 280,0 m: 1,66 g/cm³, waterbased3 500,0 m: 1,71 g/cm³, waterbased3 630,0 m: 1,25 g/cm³, waterbased4 020,0 m: 1,18 g/cm³, waterbased4 490,0 m: 1,30 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 659,0 - 3 669,019,0-134454394 000
Show on the mapOpen on FactPages ↗