WellplannerNorwegian shelf well data

Fields / Maria / 6407/1-5 S

6407/1-5 S

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by Wintershall Norge ASA with Borgland Dolphin in Maria, 31.01.2012 to 21.05.2012 (111 days), to 4 177,0 m in the Tilje Formation.

Water depth298,0 m
Total depth4 177,0 m MD
Vertical depth4 164,0 m TVD
Bottom-hole temperature145 °C
Max inclination10,6°
Rotary table31,0 m
Formation at total depthTilje Formation
RigBorgland Dolphin
Spud31.01.2012
Completed21.05.2012
OperatorWintershall Norge ASA
Position64,9889 N, 7,0048 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 329,0 mNordland GpHordaland Group, top 1 868,0 mHordaland GpRogaland Group, top 2 225,0 mRogaland GpShetland Group, top 2 358,0 mShetland GpCromer Knoll Group, top 3 188,0 mCromer Knoll GpViking Group, top 3 737,0 mFangst Group, top 3 811,0 mFangst GpBåt Group, top 4 024,0 mBåt GpFormationsNaust Formation, top 329,0 mNaust FmKai Formation, top 1 483,0 mKai FmBrygge Formation, top 1 868,0 mBrygge FmTare Formation, top 2 225,0 mTang Formation, top 2 289,0 mSpringar Formation, top 2 358,0 mSpringar FmNise Formation, top 2 536,0 mNise FmKvitnos Formation, top 2 730,0 mKvitnos FmLysing Formation, top 3 188,0 mLange Formation, top 3 228,0 mLange FmSpekk Formation, top 3 737,0 mMelke Formation, top 3 758,0 mGarn Formation, top 3 811,0 mNot Formation, top 3 902,0 mIle Formation, top 3 939,0 mRor Formation, top 4 024,0 mTilje Formation, top 4 119,0 m3291 0002 0003 0004 0004 177

Temperature

Reported at total depth145 °C
Drill-stem test at 3 822,0 m135 °C

1 released well in Maria report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6406/3-U-62,0325,2--2014
6406/3-G-3 H2,14 512,0--2017
6406/3-G-4 H2,17 424,0--2017
6406/3-U-52,1324,9--2014
6406/3-G-2 H2,17 657,0--2020
6406/3-G-1 H2,17 451,0--2017
6406/3-U-42,1319,2--2010
6406/3-U-4 A2,1328,3--2014

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"395,036"--
Surface casing20"556,026"556,01,36 FIT
Liner16"1 163,017 1/2"1 202,01,63 FIT
Liner13 3/8"1 976,014 3/4"2 019,01,77 FIT
Liner9 5/8"3 766,012 1/4"3 776,01,60 FIT
Liner7"4 175,08 1/2"--
Open hole-4 177,08 1/2"--

Mud weight

12 measurements, one dot each, 1,10 to 1,69 g/cm³ against measured depth, aqua-drill, aquadrill, brine, carbo-sea obm, carbosea, omniflow dif.

1,11,21,31,41,51,61,701 0002 0003 0004 000395,0 m: 1,24 g/cm³, Aqua-Drill434,0 m: 1,39 g/cm³, Aqua-Drill468,0 m: 1,53 g/cm³, Aquadrill533,0 m: 1,24 g/cm³, Aqua-Drill1 200,0 m: 1,24 g/cm³, Aqua-Drill1 235,0 m: 1,34 g/cm³, Aqua-Drill1 935,0 m: 1,53 g/cm³, Aqua-Drill3 726,0 m: 1,69 g/cm³, Carbo-sea OBM3 832,0 m: 1,19 g/cm³, Omniflow DIF3 840,0 m: 1,69 g/cm³, Carbosea3 840,0 m: 1,19 g/cm³, Brine4 177,0 m: 1,19 g/cm³, Omniflow DIF

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 809,0 - 3 822,016,0-13510118 512
Show on the mapOpen on FactPages ↗