WellplannerNorwegian shelf well data

Fields / Åsgard / 6506/11-4 S

6506/11-4 S

Exploration, appraisalReclassified to developmentOil

Drilled by Den norske stats oljeselskap a.s with Transocean Searcher in Åsgard, 11.02.1996 to 06.06.1996 (116 days), to 5 110,0 m in the Åre Formation.

Water depth303,0 m
Total depth5 110,0 m MD
Vertical depth4 909,0 m TVD
Bottom-hole temperature165 °C
Max inclination24,2°
Rotary table22,0 m
Formation at total depthÅre Formation
RigTransocean Searcher
Spud11.02.1996
Completed06.06.1996
OperatorDen norske stats oljeselskap a.s
Position65,0295 N, 6,6012 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 325,0 mNordland GpHordaland Group, top 1 943,0 mHordaland GpRogaland Group, top 2 297,0 mShetland Group, top 2 449,0 mShetland GpCromer Knoll Group, top 3 500,0 mCromer Knoll GpViking Group, top 4 428,0 mFangst Group, top 4 512,0 mFangst GpBåt Group, top 4 726,0 mBåt GpFormationsNaust Formation, top 325,0 mNaust FmKai Formation, top 1 485,0 mKai FmBrygge Formation, top 1 943,0 mBrygge FmTare Formation, top 2 297,0 mTang Formation, top 2 400,0 mSpringar Formation, top 2 449,0 mSpringar FmNise Formation, top 2 651,5 mNise FmKvitnos Formation, top 2 862,0 mKvitnos FmLysing Formation, top 3 500,0 mLange Formation, top 3 620,0 mLange FmLyr Formation, top 4 399,0 mSpekk Formation, top 4 428,0 mMelke Formation, top 4 434,0 mGarn Formation, top 4 512,0 mNot Formation, top 4 611,0 mIle Formation, top 4 658,0 mRor Formation, top 4 726,0 mTofte Formation, top 4 782,0 mTilje Formation, top 4 852,0 mTilje FmÅre Formation, top 5 021,5 m3251 0002 0003 0004 0005 0005 110

Temperature

Reported at total depth165 °C
Drill-stem test at 5 073,0 m163 °C
Åsgard gradient36,0 °C/km
Estimated at total depth from the gradient169 °C

The gradient is the median of 21 released wells in Åsgard with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6506/11-F-4 H0,05 110,0--1996
6506/11-F-2 H0,05 366,0--1999
6506/11-F-3 H0,06 361,0--2012
6506/11-23,24 813,0166 °C1,771991
6506/11-E-3 H4,35 893,0--2000
6506/11-N-4 H5,72 510,0--2004
6506/11-N-3 AH5,75 361,0--2007
6506/11-N-3 H5,75 354,0--2004

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"384,036"385,0-
Surface casing20"1 401,026"1 402,01,68 LOT
Intermediate13 3/8"2 810,017 1/2"2 812,01,87 LOT
Intermediate9 5/8"4 518,012 1/4"4 520,0-
Liner7"5 109,08 1/2"5 109,0-

Mud weight

14 measurements, one dot each, 1,20 to 1,75 g/cm³ against measured depth, anco 2000, anco vert.

1,21,41,61,801 0002 0003 0004 0005 0001 403,0 m: 1,20 g/cm³, ANCO 20002 400,0 m: 1,64 g/cm³, ANCO 20002 811,0 m: 1,73 g/cm³, ANCO VERT2 825,0 m: 1,64 g/cm³, ANCO 20003 060,0 m: 1,75 g/cm³, ANCO VERT3 658,0 m: 1,73 g/cm³, ANCO VERT4 272,0 m: 1,75 g/cm³, ANCO VERT4 338,0 m: 1,75 g/cm³, ANCO VERT4 520,0 m: 1,22 g/cm³, ANCO VERT4 531,0 m: 1,32 g/cm³, ANCO VERT4 701,0 m: 1,21 g/cm³, ANCO VERT4 745,0 m: 1,22 g/cm³, ANCO VERT5 034,0 m: 1,22 g/cm³, ANCO VERT5 110,0 m: 1,22 g/cm³, ANCO VERT

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
15 039,0 - 5 073,015,9-163725395 000
Show on the mapOpen on FactPages ↗