WellplannerNorwegian shelf well data

Fields / Åsgard / 6506/9-3

6506/9-3

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by Statoil Petroleum AS with Transocean Leader in Åsgard, 16.06.2013 to 27.08.2013 (72 days), to 4 692,0 m in the Åre Formation.

Water depth302,0 m
Total depth4 692,0 m MD
Vertical depth4 691,0 m TVD
Bottom-hole temperature170 °C
Max inclination5,0°
Rotary table23,5 m
Formation at total depthÅre Formation
RigTransocean Leader
Spud16.06.2013
Completed27.08.2013
OperatorStatoil Petroleum AS
Position65,2514 N, 6,9043 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 325,5 mNordland GpHordaland Group, top 1 806,0 mHordaland GpRogaland Group, top 2 108,0 mShetland Group, top 2 250,0 mShetland GpCromer Knoll Group, top 3 153,0 mCromer Knoll GpViking Group, top 4 025,0 mViking GpFangst Group, top 4 237,0 mFangst GpBåt Group, top 4 386,0 mBåt GpFormationsNaust Formation, top 325,5 mNaust FmKai Formation, top 1 426,0 mKai FmBrygge Formation, top 1 806,0 mBrygge FmTare Formation, top 2 108,0 mTang Formation, top 2 190,0 mSpringar Formation, top 2 250,0 mSpringar FmNise Formation, top 2 471,0 mNise FmKvitnos Formation, top 2 692,0 mKvitnos FmLysing Formation, top 3 153,0 mLange Formation, top 3 230,0 mLange FmLyr Formation, top 4 000,0 mSpekk Formation, top 4 025,0 mMelke Formation, top 4 032,0 mMelke FmGarn Formation, top 4 237,0 mNot Formation, top 4 273,0 mIle Formation, top 4 302,0 mRor Formation, top 4 386,0 mTofte Formation, top 4 431,0 mTilje Formation, top 4 492,0 mTilje FmÅre Formation, top 4 656,0 m3261 0002 0003 0004 0004 692

Temperature

Reported at total depth170 °C
Åsgard gradient36,0 °C/km
Estimated at total depth from the gradient161 °C

The gradient is the median of 21 released wells in Åsgard with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6506/12-NC-1 H3,85 942,0--2023
6506/12-U-153,8996,0--2009
6506/12-12 A3,85 481,0169 °C1,362009
6506/12-12 S3,85 508,0-1,782009
6506/12-NB-1 H3,85 481,0--2009
6506/12-U-143,8351,0--2008
6506/9-2 S8,04 805,0-1,892010
6506/12-N-3 AH9,06 685,0--2018

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"388,536"391,0-
Surface casing20"1 163,026"1 171,01,68 FIT
Intermediate14"2 194,317 1/2"2 201,01,83 FIT
Intermediate9 5/8"4 150,012 1/4"4 151,01,98 FIT
Open hole-4 692,08 1/2"4 692,0-

Mud weight

13 measurements, one dot each, 1,40 to 1,82 g/cm³ against measured depth, obm-low ecd-hthp, xp-07 - yellow.

1,41,51,61,71,81,901 0002 0003 0004 000485,0 m: 1,40 g/cm³, XP-07 - Yellow600,0 m: 1,60 g/cm³, XP-07 - Yellow602,0 m: 1,41 g/cm³, XP-07 - Yellow1 596,0 m: 1,45 g/cm³, XP-07 - Yellow1 857,0 m: 1,82 g/cm³, OBM-Low ECD-HTHP2 201,0 m: 1,60 g/cm³, XP-07 - Yellow2 310,0 m: 1,72 g/cm³, XP-07 - Yellow2 950,0 m: 1,82 g/cm³, OBM-Low ECD-HTHP3 925,0 m: 1,82 g/cm³, OBM-Low ECD-HTHP3 995,0 m: 1,72 g/cm³, XP-07 - Yellow4 151,0 m: 1,72 g/cm³, XP-07 - Yellow4 297,0 m: 1,82 g/cm³, OBM-Low ECD-HTHP4 692,0 m: 1,82 g/cm³, OBM-Low ECD-HTHP
Show on the mapOpen on FactPages ↗