WellplannerNorwegian shelf well data

Fields / Skarv / 6507/5-5

6507/5-5

Exploration, appraisalPlugged and abandonedOil

Drilled by BP Amoco Norge AS with West Alpha in Skarv, 28.11.2001 to 14.02.2002 (78 days), to 3 948,0 m in the Åre Formation.

Water depth375,0 m
Total depth3 948,0 m MD
Vertical depth3 948,0 m TVD
Bottom-hole temperature155 °C
Max inclination6,6°
Rotary table18,0 m
Formation at total depthÅre Formation
RigWest Alpha
Spud28.11.2001
Completed14.02.2002
OperatorBP Amoco Norge AS
Position65,7022 N, 7,5959 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 393,0 mNordland GpHordaland Group, top 1 889,0 mHordaland GpRogaland Group, top 2 021,7 mShetland Group, top 2 107,0 mShetland GpCromer Knoll Group, top 2 754,0 mCromer Knoll GpViking Group, top 3 338,8 mViking GpFangst Group, top 3 648,0 mFangst GpBåt Group, top 3 773,5 mBåt GpFormationsNaust Formation, top 393,0 mNaust FmKai Formation, top 1 393,6 mKai FmBrygge Formation, top 1 889,0 mBrygge FmTare Formation, top 2 021,7 mTang Formation, top 2 063,0 mSpringar Formation, top 2 107,0 mNise Formation, top 2 181,0 mNise FmKvitnos Formation, top 2 556,0 mKvitnos FmLysing Formation, top 2 754,0 mLange Formation, top 2 756,7 mLange FmLyr Formation, top 3 326,7 mSpekk Formation, top 3 338,8 mMelke Formation, top 3 371,5 mMelke FmGarn Formation, top 3 648,0 mNot Formation, top 3 723,0 mIle Formation, top 3 741,5 mRor Formation, top 3 773,5 mTilje Formation, top 3 831,0 mÅre Formation, top 3 925,0 m3931 0002 0003 0003 955

Temperature

Reported at total depth155 °C
Drill-stem test at 3 706,0 m133 °C
Skarv gradient37,2 °C/km
Estimated at total depth from the gradient136 °C

The gradient is the median of 10 released wells in Skarv with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/5-B-10 AH0,35 283,0--2011
6507/5-B-10 H0,35 450,0--2010
6507/5-B-9 H0,34 510,0--2010
6507/5-B-8 H0,34 695,0--2011
6507/5-B-5 AH0,35 622,0--2013
6507/5-B-5 H0,34 124,0--2010
6507/5-B-6 H0,35 535,0--2010
6507/5-B-7 AH0,35 439,0--2021

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"466,036"471,0-
Intermediate20"1 051,026"1 060,01,56 LOT
Intermediate13 3/8"2 100,017 1/2"2 106,01,90 LOT
Liner9 5/8"3 642,012 1/4"3 643,0-
Liner7"3 948,08 1/2"3 948,0-

Mud weight

6 measurements, one dot each, 0,10 to 1,63 g/cm³ against measured depth, kcl, spud mud, water/brine.

0,10,61,11,601 0002 0003 000393,0 m: 0,17 g/cm³, SPUD MUD471,0 m: 0,17 g/cm³, SPUD MUD1 060,0 m: 0,14 g/cm³, SPUD MUD3 643,0 m: 1,25 g/cm³, KCL3 643,0 m: 1,25 g/cm³, WATER/BRINE3 643,0 m: 1,63 g/cm³, KCL

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 561,0 - 3 706,025,0-133940164 256
Show on the mapOpen on FactPages ↗