WellplannerNorwegian shelf well data

Fields / Dvalin / 6507/7-15 S

6507/7-15 S

Exploration, wildcatPlugged and abandonedGas

Drilled by RWE Dea Norge AS with West Alpha in Dvalin, 09.01.2012 to 02.05.2012 (114 days), to 4 567,0 m in the Tilje Formation.

Water depth399,0 m
Total depth4 567,0 m MD
Vertical depth4 552,0 m TVD
Bottom-hole temperature165 °C
Max inclination11,9°
Rotary table18,0 m
Formation at total depthTilje Formation
RigWest Alpha
Spud09.01.2012
Completed02.05.2012
OperatorRWE Dea Norge AS
Position65,4255 N, 7,0989 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 417,0 mNordland GpHordaland Group, top 1 906,0 mRogaland Group, top 2 002,0 mShetland Group, top 2 122,0 mShetland GpCromer Knoll Group, top 2 955,0 mCromer Knoll GpViking Group, top 3 853,5 mViking GpFangst Group, top 4 266,5 mFangst GpBåt Group, top 4 409,5 mBåt GpFormationsNaust Formation, top 417,0 mNaust FmKai Formation, top 1 481,0 mKai FmBrygge Formation, top 1 906,0 mTare Formation, top 2 002,0 mTang Formation, top 2 059,0 mSpringar Formation, top 2 122,0 mSpringar FmNise Formation, top 2 620,0 mNise FmLysing Formation, top 2 955,0 mLange Formation, top 3 029,5 mLange FmSpekk Formation, top 3 853,5 mMelke Formation, top 3 866,0 mMelke FmGarn Formation, top 4 266,5 mNot Formation, top 4 350,0 mIle Formation, top 4 356,0 mRor Formation, top 4 409,5 mTilje Formation, top 4 499,0 m4171 0002 0003 0004 0004 567

Temperature

Reported at total depth165 °C
Dvalin gradient38,9 °C/km
Estimated at total depth from the gradient165 °C

The gradient is the median of 3 released wells in Dvalin with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/7-Z-2 H2,05 595,0--2019
6507/7-Z-3 H2,04 787,0--2019
6507/7-Z-1 H2,04 550,0--2019
6507/7-Z-4 H2,04 891,0--2019
6507/7-U-102,01 327,0--2017
6507/7-14 S3,54 534,0162 °C1,712010
6507/7-16,34 825,0170 °C1,711984
6507/7-129,83 976,0128 °C1,571999

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"497,036"497,0-
Surface casing20"594,026"596,0-
Pilot hole-649,09 7/8"649,0-
Intermediate16"1 320,020"1 336,0-
Intermediate13 3/8"2 175,017 1/2"2 210,0-
Intermediate9 5/8"4 124,012 1/4"4 133,0-
Open hole-4 534,08 1/2"4 534,0-

Mud weight

15 measurements, one dot each, 1,00 to 1,83 g/cm³ against measured depth, glydril, kcl mud, spud mud, versatherm, seawater.

1,01,21,41,61,801 0002 0003 0004 000460,0 m: 1,50 g/cm³, Spud mud496,0 m: 1,04 g/cm³, Spud mud596,0 m: 1,03 g/cm³, seawater649,0 m: 1,04 g/cm³, Spud mud1 336,0 m: 1,13 g/cm³, KCl mud2 210,0 m: 1,50 g/cm³, Glydril3 665,0 m: 1,64 g/cm³, Versatherm4 133,0 m: 1,64 g/cm³, Versatherm4 133,0 m: 1,66 g/cm³, Versatherm4 265,0 m: 1,80 g/cm³, Versatherm4 265,0 m: 1,68 g/cm³, Versatherm4 416,0 m: 1,82 g/cm³, Versatherm4 567,0 m: 1,83 g/cm³, Versatherm4 567,0 m: 1,60 g/cm³, Glydril4 567,0 m: 1,83 g/cm³, Versatherm
Show on the mapOpen on FactPages ↗