WellplannerNorwegian shelf well data

Fields / 6608/10-16

6608/10-16

Exploration, wildcatPlugged and abandonedShows

Drilled by Noreco Norway AS with Bredford Dolphin, 08.04.2014 to 13.06.2014 (66 days), to 4 025,0 m in the Åre Formation.

Water depth371,0 m
Total depth4 025,0 m MD
Vertical depth4 025,0 m TVD
Bottom-hole temperature144 °C
Max inclination2,4°
Rotary table25,0 m
Formation at total depthÅre Formation
RigBredford Dolphin
Spud08.04.2014
Completed13.06.2014
OperatorNoreco Norway AS
Position66,1439 N, 8,0669 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 396,5 mNordland GpHordaland Group, top 1 507,0 mHordaland GpRogaland Group, top 1 891,0 mShetland Group, top 1 950,0 mShetland GpCromer Knoll Group, top 3 358,0 mCromer Knoll GpViking Group, top 3 531,0 mViking GpFangst Group, top 3 653,0 mBåt Group, top 3 761,0 mBåt GpFormationsNaust Formation, top 396,5 mNaust FmKai Formation, top 1 395,0 mBrygge Formation, top 1 507,0 mBrygge FmTare Formation, top 1 891,0 mSpringar Formation, top 1 950,0 mSpringar FmNise Formation, top 2 097,0 mNise FmLange Formation, top 3 358,0 mLange FmLyr Formation, top 3 484,0 mSpekk Formation, top 3 531,0 mMelke Formation, top 3 534,0 mGarn Formation, top 3 653,0 mNot Formation, top 3 721,0 mIle Formation, top 3 750,0 mRor Formation, top 3 761,0 mTofte Formation, top 3 763,0 mTilje Formation, top 3 817,0 mTilje FmÅre Formation, top 3 992,5 m3961 0002 0003 0004 0004 025

Temperature

Reported at total depth144 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6608/10-184,63 469,0131 °C1,582018
6608/10-18 A4,63 474,0-1,582018
6608/10-18 B4,63 585,0-1,582018
6608/10-15,53 437,0110 °C1,671989
6608/10-V-3 H5,86 155,0--2025
6608/10-V-2 H5,85 579,0--2024
6608/10-V-4 H5,85 643,0--2024
6607/12-35,94 306,0159 °C1,802012

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"462,036"465,0-
Surface casing20"684,026"691,0-
Pilot hole-734,09 7/8"734,0-
Intermediate13 3/8"1 561,017 1/2"1 575,0-
Intermediate9 5/8"3 349,012 1/4"3 349,0-
Open hole-4 025,08 1/2"4 025,0-

Mud weight

8 measurements, one dot each, 1,20 to 1,59 g/cm³ against measured depth, aquadrill, aquadrill, carbo-sea, spud mud, spud mud.

1,21,31,41,51,601 0002 0003 0004 000465,0 m: 1,49 g/cm³, Spud Mud609,0 m: 1,31 g/cm³, AQUADRILL692,0 m: 1,29 g/cm³, Spud mud1 575,0 m: 1,30 g/cm³, Aquadrill1 689,0 m: 1,58 g/cm³, CARBO-SEA3 355,0 m: 1,59 g/cm³, CARBO-SEA3 614,0 m: 1,47 g/cm³, CARBO-SEA4 025,0 m: 1,47 g/cm³, CARBO-SEA
Show on the mapOpen on FactPages ↗