WellplannerNorwegian shelf well data

Fields / Urd / 6608/10-8

6608/10-8

Exploration, wildcatPlugged and abandonedOil

Drilled by Statoil ASA (old) with Stena Don in Urd, 29.12.2001 to 12.04.2002 (104 days), to 2 652,0 m in the Åre Formation.

Water depth376,0 m
Total depth2 652,0 m MD
Vertical depth2 650,0 m TVD
Bottom-hole temperature97 °C
Max inclination5,6°
Rotary table24,0 m
Formation at total depthÅre Formation
RigStena Don
Spud29.12.2001
Completed12.04.2002
OperatorStatoil ASA (old)
Position66,0595 N, 8,1786 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 400,0 mNordland GpHordaland Group, top 1 560,0 mHordaland GpRogaland Group, top 1 778,0 mRogaland GpShetland Group, top 1 894,3 mShetland GpCromer Knoll Group, top 2 087,5 mCromer Knoll GpViking Group, top 2 221,5 mViking GpFangst Group, top 2 348,0 mBåt Group, top 2 391,0 mBåt GpFormationsNaust Formation, top 400,0 mNaust FmKai Formation, top 1 418,0 mKai FmBrygge Formation, top 1 560,0 mBrygge FmTare Formation, top 1 778,0 mTare FmTang Formation, top 1 863,0 mSpringar Formation, top 1 894,3 mSpringar FmLyr Formation, top 2 087,5 mLyr FmSpekk Formation, top 2 221,5 mMelke Formation, top 2 224,0 mIntra Melke Fm Ss, top 2 293,5 mMelke Formation, top 2 341,0 mNot Formation, top 2 348,0 mIle Formation, top 2 389,0 mTilje Formation, top 2 391,0 mÅre Formation, top 2 402,5 mÅre Fm4005001 0001 5002 0002 5002 652

Temperature

Reported at total depth97 °C
Urd gradient41,7 °C/km
Estimated at total depth from the gradient98 °C

The gradient is the median of 9 released wells in Urd with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6608/10-8 A same well0,02 660,094 °C1,372002
6608/10-J-3 AH1,23 532,0--2006
6608/10-J-3 H1,23 015,0--2005
6608/10-J-2 H1,23 290,0--2005
6608/10-J-4 H1,23 010,0--2021
6608/10-J-1 H1,22 925,0--2005
6608/10-101,42 800,0-1,412003
6608/10-92,02 400,094 °C1,602003

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"459,036"460,0-
Surface casing13 3/8"1 290,017 1/2"1 315,01,57 LOT
Open hole-2 652,08 1/2"2 652,0-

Mud weight

6 measurements, one dot each, 1,00 to 1,37 g/cm³ against measured depth, kcl/glycol/poly, seawater/pac.

1,01,11,21,31,405001 0001 5002 0002 500451,0 m: 1,03 g/cm³, SEAWATER/PAC459,0 m: 1,03 g/cm³, SEAWATER/PAC1 303,0 m: 1,03 g/cm³, SEAWATER/PAC1 341,0 m: 1,37 g/cm³, KCL/GLYCOL/POLY1 835,0 m: 1,35 g/cm³, KCL/GLYCOL/POLY1 871,0 m: 1,35 g/cm³, KCL/GLYCOL/POLY
Show on the mapOpen on FactPages ↗