WellplannerNorwegian shelf well data

Fields / Brynhild / 7/4-2

7/4-2

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with Mærsk Giant in Brynhild, 15.12.2007 to 13.03.2008 (89 days), to 3 459,0 m in the Zechstein Group.

Water depth82,0 m
Total depth3 459,0 m MD
Vertical depth3 458,0 m TVD
Bottom-hole temperature153 °C
Max inclination3,3°
Rotary table43,0 m
Formation at total depthZechstein Group
RigMærsk Giant
Spud15.12.2007
Completed13.03.2008
OperatorLundin Norway AS
Position57,5036 N, 2,3092 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 125,0 mNordland GpHordaland Group, top 1 190,0 mHordaland GpRogaland Group, top 2 504,0 mRogaland GpShetland Group, top 2 757,0 mShetland GpCromer Knoll Group, top 3 123,0 mCromer Knoll GpTyne Group, top 3 288,0 mVestland Group, top 3 382,0 mNo Group Defined, top 3 400,0 mZechstein Group, top 3 457,0 mFormationsBalder Formation, top 2 504,0 mSele Formation, top 2 528,0 mSele FmLista Formation, top 2 686,0 mVåle Formation, top 2 745,0 mEkofisk Formation, top 2 757,0 mEkofisk FmTor Formation, top 2 886,0 mTor FmHod Formation, top 3 013,0 mRødby Formation, top 3 123,0 mSola Formation, top 3 154,5 mTuxen Formation, top 3 162,5 mÅsgard Formation, top 3 203,5 mMandal Formation, top 3 288,0 mFarsund Formation, top 3 336,0 mUla Formation, top 3 382,0 mSkagerrak Formation, top 3 400,0 mSmith Bank Formation, top 3 421,0 m1251 0002 0003 0003 487

Temperature

Reported at total depth153 °C
Brynhild gradient43,0 °C/km
Estimated at total depth from the gradient147 °C

The gradient is the median of 3 released wells in Brynhild with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
7/7-A-4 H1,33 839,0--2015
7/7-A-1 AH1,34 658,0--2015
7/7-A-1 BH1,3----
7/7-A-1 H1,34 293,0--2014
7/7-A-3 AH1,34 793,0--2014
7/7-A-3 H1,34 325,0--2013
7/7-A-2 H1,34 433,0--2013
7/7-22,13 430,0147 °C2,041992

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"208,036"210,0-
Surface casing20"950,026"950,01,96 LOT
Intermediate13 3/8"1 848,017 1/2"1 847,01,91 LOT
Intermediate9 5/8"3 219,012 1/4"3 229,02,10 LOT
Open hole-3 450,08 1/2"3 458,0-

Mud weight

15 measurements, one dot each, 1,40 to 1,95 g/cm³ against measured depth, oil based, oil based, water based.

1,41,61,82,001 0002 0003 000319,0 m: 1,57 g/cm³, water based550,0 m: 1,76 g/cm³, Oil Based1 103,0 m: 1,45 g/cm³, water based1 400,0 m: 1,55 g/cm³, water based1 586,0 m: 1,55 g/cm³, water based1 826,0 m: 1,57 g/cm³, water based1 968,0 m: 1,71 g/cm³, oil based2 781,0 m: 1,71 g/cm³, oil based3 020,0 m: 1,95 g/cm³, Oil Based3 028,0 m: 1,71 g/cm³, oil based3 147,0 m: 1,75 g/cm³, oil based3 226,0 m: 1,76 g/cm³, oil based3 278,0 m: 1,95 g/cm³, oil based3 403,0 m: 1,95 g/cm³, oil based3 459,0 m: 1,95 g/cm³, oil based
Show on the mapOpen on FactPages ↗