WellplannerNorwegian shelf well data

Fields / Goliat / 7122/7-3

7122/7-3

Exploration, wildcatPlugged and abandonedOil and gas

Drilled by Eni Norge AS with Eirik Raude in Goliat, 24.10.2005 to 08.01.2006 (76 days), to 2 726,0 m in the Tempelfjorden Group.

Water depth343,0 m
Total depth2 726,0 m MD
Vertical depth2 725,0 m TVD
Bottom-hole temperature73 °C
Max inclination4,7°
Rotary table25,0 m
Formation at total depthTempelfjorden Group
RigEirik Raude
Spud24.10.2005
Completed08.01.2006
OperatorEni Norge AS
Position71,2549 N, 22,2679 E

Formations

17 tops reported, measured depth in metres.

GroupsNordland Group, top 368,0 mNordland GpNygrunnen Group, top 634,0 mAdventdalen Group, top 650,0 mAdventdalen GpKapp Toscana Group, top 1 087,0 mKapp Toscana GpSassendalen Group, top 1 808,0 mSassendalen GpTempelfjorden Group, top 2 595,0 mTempelfjorden GpFormationsKviting Formation, top 634,0 mKolmule Formation, top 650,0 mKolmule FmKolje Formation, top 865,0 mKolje FmKnurr Formation, top 959,5 mHekkingen Formation, top 1 018,0 mFuglen Formation, top 1 073,0 mTubåen Formation, top 1 087,0 mTubåen FmSnadd Formation, top 1 180,0 mSnadd FmKobbe Formation, top 1 808,0 mKobbe FmKlappmyss Formation, top 2 043,5 mKlappmyss FmHavert Formation, top 2 211,5 mHavert Fm3685001 0001 5002 0002 5002 726

Temperature

Reported at total depth73 °C
Goliat gradient29,5 °C/km
Estimated at total depth from the gradient74 °C

The gradient is the median of 5 released wells in Goliat with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
7122/7-U-30,0491,0--2005
7122/7-U-50,5553,1--2010
7122/7-F-4 H0,63 389,0--2014
7122/7-F-1 H0,61 876,0--2016
7122/7-F-3 H0,63 820,0--2014
7122/7-D-1 H0,64 221,0--2014
7122/7-D-1 Y2H0,63 444,0--2024
7122/7-D-4 AH0,63 709,0--2014

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"416,036"421,0-
Surface casing20"529,026"530,01,35 LOT
Surface casing13 3/8"995,016"1 000,02,62 LOT
Intermediate9 5/8"1 694,012 1/4"1 712,01,19 LOT
Liner7"2 405,08 1/2"2 420,0-
Open hole-2 726,06"2 726,0-

Mud weight

11 measurements, one dot each, 1,00 to 1,55 g/cm³ against measured depth, formate polymer, formpro, spud mud.

1,01,21,41,605001 0001 5002 0002 500372,0 m: 1,03 g/cm³, SPUD MUD400,0 m: 1,25 g/cm³, FORMATE POLYMER538,0 m: 1,20 g/cm³, FORMPRO900,0 m: 1,20 g/cm³, FORMATE POLYMER1 056,0 m: 1,30 g/cm³, FORMATE POLYMER1 230,0 m: 1,30 g/cm³, FORMATE POLYMER1 712,0 m: 1,34 g/cm³, FORMATE POLYMER1 816,0 m: 1,36 g/cm³, FORMATE POLYMER2 420,0 m: 1,54 g/cm³, FORMATE POLYMER2 540,0 m: 1,55 g/cm³, FORMATE POLYMER2 726,0 m: 1,54 g/cm³, FORMATE POLYMER
Show on the mapOpen on FactPages ↗