WellplannerNorwegian shelf well data

Fields / 15/8-2

15/8-2

Exploration, wildcatPlugged and abandonedDry

Drilled by Statoil Petroleum AS with COSLPioneer, 20.08.2011 to 21.10.2011 (62 days), to 4 386,0 m in the Sleipner Formation.

Water depth119,0 m
Total depth4 386,0 m MD
Vertical depth4 382,5 m TVD
Bottom-hole temperature143 °C
Max inclination8,7°
Rotary table25,0 m
Formation at total depthSleipner Formation
RigCOSLPioneer
Spud20.08.2011
Completed21.10.2011
OperatorStatoil Petroleum AS
Position58,4153 N, 1,5472 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 144,0 mNordland GpHordaland Group, top 1 027,0 mHordaland GpShetland Group, top 2 847,5 mShetland GpCromer Knoll Group, top 3 558,0 mCromer Knoll GpViking Group, top 3 763,0 mVestland Group, top 3 881,5 mVestland GpFormationsUtsira Formation, top 877,5 mUtsira FmGrid Formation, top 1 898,0 mGrid FmBalder Formation, top 2 312,0 mSele Formation, top 2 354,0 mLista Formation, top 2 399,0 mHeimdal Formation, top 2 432,0 mHeimdal FmVåle Formation, top 2 764,0 mEkofisk Formation, top 2 847,5 mTor Formation, top 2 904,0 mTor FmHod Formation, top 3 113,5 mHod FmBlodøks Formation, top 3 381,0 mHidra Formation, top 3 432,0 mRødby Formation, top 3 558,0 mSola Formation, top 3 579,5 mÅsgard Formation, top 3 642,5 mDraupne Formation, top 3 763,0 mHeather Formation, top 3 839,0 mHugin Formation, top 3 881,5 mHugin FmSleipner Formation, top 4 238,0 mSleipner Fm1441 0002 0003 0004 0004 386

Temperature

Reported at total depth143 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
15/8-G-4 AH5,45 014,0--2025
15/8-G-4 H5,44 445,0--2018
15/8-G-1 AH5,44 070,0--2023
15/8-G-1 H5,43 950,0--2018
15/8-16,04 300,0141 °C1,381981
15/9-29,43 764,0107 °C1,351978
15/9-69,53 946,0107 °C1,451980
15/9-59,53 946,0131 °C1,401979

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"204,536"209,0-
Pilot hole-1 100,09 7/8"1 100,0-
Surface casing20"1 127,726"1 133,01,44 LOT
Intermediate13 3/8"2 409,817 1/2"2 419,01,72 LOT
Intermediate9 5/8"3 708,012 1/4"3 708,01,55 LOT
Open hole-4 386,08 1/2"4 386,0-

Mud weight

14 measurements, one dot each, 1,20 to 1,41 g/cm³ against measured depth, glydril, spud mud, versatec.

1,21,31,41,501 0002 0003 0004 0001 133,0 m: 1,35 g/cm³, Spud Mud1 136,0 m: 1,22 g/cm³, Glydril1 215,0 m: 1,22 g/cm³, Glydril1 820,0 m: 1,22 g/cm³, Glydril2 379,0 m: 1,32 g/cm³, Glydril2 419,0 m: 1,35 g/cm³, Glydril2 985,0 m: 1,30 g/cm³, Versatec3 188,0 m: 1,30 g/cm³, Versatec3 236,0 m: 1,30 g/cm³, Versatec3 650,0 m: 1,30 g/cm³, Versatec3 706,0 m: 1,30 g/cm³, Versatec3 849,0 m: 1,41 g/cm³, Versatec4 340,0 m: 1,41 g/cm³, Versatec4 386,0 m: 1,41 g/cm³, Versatec
Show on the mapOpen on FactPages ↗