WellplannerNorwegian shelf well data

Fields / Ivar Aasen / 16/1-22 B

16/1-22 B

Exploration, appraisalPlugged and abandonedOil

Drilled by Det norske oljeselskap ASA with Maersk Interceptor in Ivar Aasen, 04.06.2015 to 14.06.2015 (10 days), to 3 215,0 m in the Skagerrak Formation.

Water depth111,0 m
Total depth3 215,0 m MD
Vertical depth2 556,0 m TVD
Bottom-hole temperature-
Max inclination59,7°
Rotary table55,0 m
Formation at total depthSkagerrak Formation
RigMaersk Interceptor
Spud04.06.2015
Completed14.06.2015
OperatorDet norske oljeselskap ASA
Position58,9064 N, 2,1621 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 166,0 mNordland GpHordaland Group, top 842,0 mHordaland GpHordaland Group, top 1 207,5 mHordaland GpHordaland Group, top 1 825,5 mHordaland GpRogaland Group, top 2 342,0 mRogaland GpCromer Knoll Group, top 2 907,2 mViking Group, top 2 940,2 mViking GpHegre Group, top 3 065,6 mHegre GpFormationsUtsira Formation, top 773,5 mUtsira FmSkade Formation, top 945,0 mSkade FmGrid Formation, top 1 621,4 mGrid FmBalder Formation, top 2 342,0 mSele Formation, top 2 426,5 mSele FmLista Formation, top 2 530,5 mHeimdal Formation, top 2 600,2 mHeimdal FmLista Formation, top 2 726,7 mVåle Formation, top 2 811,5 mÅsgard Formation, top 2 907,2 mDraupne Formation, top 2 940,2 mDraupne FmHeather Formation, top 3 049,0 mSkagerrak Formation, top 3 065,6 mSkagerrak Fm1661 0002 0003 0003 215

Temperature

Reported at total depth-
Ivar Aasen gradient39,1 °C/km
Estimated at total depth from the gradient97 °C

The gradient is the median of 6 released wells in Ivar Aasen with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/1-22 A same well0,02 896,0-1,352015
16/1-22 S same well0,02 640,0102 °C1,242015
16/1-92,42 544,091 °C1,362008
16/1-112,62 625,0105 °C1,312010
16/1-11 A2,62 595,0-1,322010
16/1-D-182,73 250,0--2019
16/1-D-18 A2,74 647,0--2019
16/1-D-172,73 169,0--2020

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"220,530"220,5-
Surface casing20"354,026"359,0-
Intermediate16"598,017 1/2"600,01,37 FIT
Intermediate9 5/8"1 448,512 1/4"1 460,01,81 FIT
Open hole-3 215,08 1/2"3 215,0-

Mud weight

3 measurements, one dot each, 1,10 to 1,34 g/cm³ against measured depth, versatec obm.

1,11,21,31,401 0002 0003 00019,0 m: 1,34 g/cm³, Versatec OBM3 215,0 m: 1,19 g/cm³, Versatec OBM3 215,0 m: 1,34 g/cm³, Versatec OBM
Show on the mapOpen on FactPages ↗