WellplannerNorwegian shelf well data

Fields / Ivar Aasen / 16/1-22 S

16/1-22 S

Exploration, appraisalPlugged and abandonedOil

Drilled by Det norske oljeselskap ASA with Maersk Interceptor in Ivar Aasen, 24.04.2015 to 27.05.2015 (33 days), to 2 640,0 m in the Skagerrak Formation.

Water depth111,0 m
Total depth2 640,0 m MD
Vertical depth2 617,0 m TVD
Bottom-hole temperature102 °C
Max inclination15,5°
Rotary table55,0 m
Formation at total depthSkagerrak Formation
RigMaersk Interceptor
Spud24.04.2015
Completed27.05.2015
OperatorDet norske oljeselskap ASA
Position58,9064 N, 2,1621 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 166,0 mNordland GpHordaland Group, top 842,0 mHordaland GpHordaland Group, top 1 207,5 mHordaland GpRogaland Group, top 2 083,5 mRogaland GpCromer Knoll Group, top 2 380,0 mViking Group, top 2 411,5 mViking GpHegre Group, top 2 506,0 mHegre GpFormationsUtsira Formation, top 773,5 mUtsira FmSkade Formation, top 949,5 mSkade FmGrid Formation, top 1 626,5 mGrid FmBalder Formation, top 2 083,5 mSele Formation, top 2 124,0 mLista Formation, top 2 194,0 mHeimdal Formation, top 2 239,0 mLista Formation, top 2 288,5 mVåle Formation, top 2 321,5 mÅsgard Formation, top 2 380,0 mDraupne Formation, top 2 411,5 mHeather Formation, top 2 486,5 mSkagerrak Formation, top 2 506,0 mSkagerrak Fm1665001 0001 5002 0002 5002 640

Temperature

Reported at total depth102 °C
Ivar Aasen gradient39,1 °C/km
Estimated at total depth from the gradient100 °C

The gradient is the median of 6 released wells in Ivar Aasen with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/1-22 A same well0,02 896,0-1,352015
16/1-22 B same well0,03 215,0-1,342015
16/1-92,42 544,091 °C1,362008
16/1-112,62 625,0105 °C1,312010
16/1-11 A2,62 595,0-1,322010
16/1-D-182,73 250,0--2019
16/1-D-18 A2,74 647,0--2019
16/1-D-172,73 169,0--2020

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"220,530"220,5-
Surface casing20"354,026"359,0-
Intermediate16"598,017 1/2"600,01,37 FIT
Pilot hole-601,09 7/8"601,0-
Intermediate9 5/8"1 448,512 1/4"1 460,01,81 FIT
Open hole-2 640,08 1/2"2 640,0-

Mud weight

10 measurements, one dot each, 1,00 to 1,24 g/cm³ against measured depth, spud mud, versatec obm.

1,01,11,21,305001 0001 5002 0002 500601,0 m: 1,09 g/cm³, SPUD MUD1 450,0 m: 1,19 g/cm³, Versatec OBM1 857,0 m: 1,23 g/cm³, Versatec OBM2 097,0 m: 1,24 g/cm³, Versatec OBM2 411,0 m: 1,24 g/cm³, Versatec OBM2 502,0 m: 1,24 g/cm³, Versatec OBM2 517,0 m: 1,24 g/cm³, Versatec OBM2 551,0 m: 1,24 g/cm³, Versatec OBM2 640,0 m: 1,24 g/cm³, Versatec OBM2 640,0 m: 1,24 g/cm³, Versatec OBM
Show on the mapOpen on FactPages ↗