WellplannerNorwegian shelf well data

Fields / Johan Sverdrup / 16/2-13 A

16/2-13 A

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with Transocean Arctic in Johan Sverdrup, 30.08.2012 to 29.09.2012 (30 days), to 2 776,0 m in the No Group Defined.

Water depth116,0 m
Total depth2 776,0 m MD
Vertical depth2 102,0 m TVD
Bottom-hole temperature-
Max inclination65,3°
Rotary table24,0 m
Formation at total depthNo Group Defined
RigTransocean Arctic
Spud30.08.2012
Completed29.09.2012
OperatorLundin Norway AS
Position58,8329 N, 2,6529 E

Formations

33 tops reported, measured depth in metres.

GroupsNordland Group, top 140,0 mNordland GpHordaland Group, top 945,0 mHordaland GpRogaland Group, top 1 685,5 mRogaland GpShetland Group, top 2 041,0 mShetland GpCromer Knoll Group, top 2 430,5 mCromer Knoll GpViking Group, top 2 582,5 mVestland Group, top 2 623,5 mHegre Group, top 2 626,0 mRotliegend Group, top 2 658,0 mUndefined Group, top 2 692,5 mFormationsUtsira Formation, top 838,0 mUndifferentiated, top 869,0 mSkade Formation, top 945,0 mSkade FmNo Formal Name, top 1 085,0 mNo Formal NameNo Formal Name, top 1 632,5 mBalder Formation, top 1 685,5 mSele Formation, top 1 756,0 mLista Formation, top 1 783,0 mLista FmVåle Formation, top 1 991,5 mEkofisk Formation, top 2 041,0 mTor Formation, top 2 090,0 mTor FmHod Formation, top 2 232,5 mHod FmBlodøks Formation, top 2 352,5 mSvarte Formation, top 2 393,0 mRødby Formation, top 2 430,5 mRødby FmSola Formation, top 2 526,5 mÅsgard Formation, top 2 549,5 mDraupne Formation, top 2 582,5 mIntra Draupne Fm Ss, top 2 597,0 mHeather Formation, top 2 613,0 mIntra Heather Fm Ss, top 2 621,0 mHugin Formation, top 2 623,5 mSkagerrak Formation, top 2 626,0 mSkagerrak Fm1405001 0001 5002 0002 5002 776

Temperature

Reported at total depth-
Johan Sverdrup gradient43,0 °C/km
Estimated at total depth from the gradient88 °C

The gradient is the median of 20 released wells in Johan Sverdrup with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/2-13 S same well0,02 090,0-1,402012
16/2-U-130,0382,0--2012
16/2-62,42 131,0-1,372010
16/3-8 A3,22 132,0-1,402014
16/3-8 S3,22 109,088 °C1,412014
16/3-O-1 H3,21 701,0--2024
16/3-O-2 H3,23 200,0--2022
16/3-O-3 H3,23 507,0--2024

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"218,036"220,0-
Surface casing20"717,026"726,01,74 LOT
Pilot hole-725,09 7/8"725,0-
Intermediate9 5/8"2 487,012 1/4"2 495,01,60 FIT
Open hole-2 776,08 1/2"2 776,0-

Mud weight

6 measurements, one dot each, 1,20 to 1,45 g/cm³ against measured depth, enviromul obm, water base.

1,21,31,41,505001 0001 5002 0002 500667,0 m: 1,39 g/cm³, Water Base880,0 m: 1,35 g/cm³, Enviromul OBM2 198,0 m: 1,45 g/cm³, Enviromul OBM2 495,0 m: 1,45 g/cm³, Enviromul OBM2 505,0 m: 1,20 g/cm³, Enviromul OBM2 776,0 m: 1,20 g/cm³, Enviromul OBM
Show on the mapOpen on FactPages ↗