WellplannerNorwegian shelf well data

Fields / Johan Sverdrup / 16/2-13 S

16/2-13 S

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with Transocean Arctic in Johan Sverdrup, 24.07.2012 to 30.08.2012 (37 days), to 2 090,0 m in the No Group Defined.

Water depth116,0 m
Total depth2 090,0 m MD
Vertical depth2 086,0 m TVD
Bottom-hole temperature-
Max inclination13,5°
Rotary table24,0 m
Formation at total depthNo Group Defined
RigTransocean Arctic
Spud24.07.2012
Completed30.08.2012
OperatorLundin Norway AS
Position58,8329 N, 2,6529 E

Formations

31 tops reported, measured depth in metres.

GroupsNordland Group, top 140,0 mNordland GpHordaland Group, top 934,0 mHordaland GpRogaland Group, top 1 417,5 mRogaland GpShetland Group, top 1 570,0 mShetland GpCromer Knoll Group, top 1 799,0 mCromer Knoll GpViking Group, top 1 914,5 mVestland Group, top 1 941,0 mHegre Group, top 1 949,0 mRotliegend Group, top 1 955,0 mRotliegend GpUndefined Group, top 2 034,5 mFormationsUtsira Formation, top 838,0 mUtsira FmSkade Formation, top 934,0 mSkade FmNo Formal Name, top 1 082,0 mNo Formal NameNo Formal Name, top 1 382,5 mBalder Formation, top 1 417,5 mSele Formation, top 1 442,5 mLista Formation, top 1 460,0 mLista FmVåle Formation, top 1 549,0 mEkofisk Formation, top 1 570,0 mTor Formation, top 1 584,0 mHod Formation, top 1 646,5 mHod FmBlodøks Formation, top 1 730,0 mSvarte Formation, top 1 760,5 mRødby Formation, top 1 799,0 mRødby FmSola Formation, top 1 869,5 mÅsgard Formation, top 1 886,0 mDraupne Formation, top 1 914,5 mIntra Draupne Fm Ss, top 1 925,0 mHeather Formation, top 1 940,0 mHugin Formation, top 1 941,0 mSkagerrak Formation, top 1 949,0 mSkagerrak Fm1405001 0001 5002 0002 090

Temperature

Reported at total depth-
Johan Sverdrup gradient43,0 °C/km
Estimated at total depth from the gradient88 °C

The gradient is the median of 20 released wells in Johan Sverdrup with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/2-13 A same well0,02 776,0-1,452012
16/2-U-130,0382,0--2012
16/2-62,42 131,0-1,372010
16/3-8 A3,22 132,0-1,402014
16/3-8 S3,22 109,088 °C1,412014
16/3-O-1 H3,21 701,0--2024
16/3-O-2 H3,23 200,0--2022
16/3-O-3 H3,23 507,0--2024

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"218,036"220,0-
Surface casing20"717,026"725,01,74 LOT
Pilot hole-725,09 7/8"725,0-
Open hole-730,017 1/2"730,0-
Intermediate9 5/8"1 854,012 1/2"1 860,01,80 LOT
Open hole-2 090,08 1/2"2 090,0-

Mud weight

6 measurements, one dot each, 1,20 to 1,40 g/cm³ against measured depth, water base.

1,21,31,405001 0001 5002 000730,0 m: 1,32 g/cm³, Water Base750,0 m: 1,35 g/cm³, Water Base1 010,0 m: 1,40 g/cm³, Water Base1 860,0 m: 1,40 g/cm³, Water Base1 918,0 m: 1,40 g/cm³, Water Base2 090,0 m: 1,20 g/cm³, Water Base
Show on the mapOpen on FactPages ↗