WellplannerNorwegian shelf well data

Fields / Johan Sverdrup / 16/3-4

16/3-4

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with Bredford Dolphin in Johan Sverdrup, 16.05.2011 to 28.06.2011 (43 days), to 2 020,0 m in the Basement.

Water depth117,0 m
Total depth2 020,0 m MD
Vertical depth2 020,0 m TVD
Bottom-hole temperature87 °C
Max inclination1,6°
Rotary table25,0 m
Formation at total depthBasement
RigBredford Dolphin
Spud16.05.2011
Completed28.06.2011
OperatorLundin Norway AS
Position58,8032 N, 2,7190 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 141,5 mNordland GpHordaland Group, top 934,0 mHordaland GpRogaland Group, top 1 354,0 mRogaland GpShetland Group, top 1 485,0 mShetland GpCromer Knoll Group, top 1 782,5 mCromer Knoll GpViking Group, top 1 914,4 mBasement, top 1 940,2 mBasementFormationsUtsira Formation, top 800,0 mUtsira FmNo Formal Name, top 876,5 mNo Formal NameSkade Formation, top 940,0 mSkade FmNo Formal Name, top 1 007,0 mNo Formal NameNo Formal Name, top 1 328,0 mBalder Formation, top 1 354,0 mSele Formation, top 1 385,0 mLista Formation, top 1 395,5 mLista FmVåle Formation, top 1 465,0 mEkofisk Formation, top 1 485,0 mTor Formation, top 1 504,0 mTor FmHod Formation, top 1 577,0 mHod FmTryggvason Formation, top 1 694,0 mBlodøks Formation, top 1 705,5 mSvarte Formation, top 1 741,0 mRødby Formation, top 1 782,5 mRødby FmSola Formation, top 1 861,0 mÅsgard Formation, top 1 886,0 mDraupne Formation, top 1 914,4 mIntra Draupne Fm Ss, top 1 926,4 mIntra Draupne Fm Ss1425001 0001 5002 0002 020

Temperature

Reported at total depth87 °C
Drill-stem test at 1 936,0 m83 °C
Johan Sverdrup gradient43,0 °C/km
Estimated at total depth from the gradient85 °C

The gradient is the median of 20 released wells in Johan Sverdrup with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/3-4 A same well0,02 128,0-1,372011
16/3-P-1 H0,64 036,0--2022
16/3-P-4 H0,63 414,0--2022
16/3-P-3 H0,64 093,0--2026
16/3-P-2 H0,63 925,0--2022
16/3-62,02 050,0-1,502013
16/3-O-2 H2,33 200,0--2022
16/3-O-1 H2,31 701,0--2024

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"207,036"211,0-
Surface casing20"752,026"760,01,95 LOT
Pilot hole-760,09 7/8"760,0-
Intermediate9 5/8"1 795,012 1/4"1 803,01,73 LOT
Open hole-2 020,08 1/2"2 020,0-

Mud weight

8 measurements, one dot each, 1,00 to 1,30 g/cm³ against measured depth, nacl brine, permormadril, permormadrill, spud mud.

1,01,11,21,305001 0001 5002 000450,0 m: 1,05 g/cm³, Spud Mud763,0 m: 1,30 g/cm³, Permormadrill1 705,0 m: 1,30 g/cm³, Permormadrill1 919,0 m: 1,21 g/cm³, Permormadrill1 961,0 m: 1,20 g/cm³, Permormadrill2 020,0 m: 1,20 g/cm³, NaCl Brine2 020,0 m: 1,21 g/cm³, Permormadril2 020,0 m: 1,20 g/cm³, Permormadrill

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
11 923,0 - 1 936,020,6-8388518 200
Show on the mapOpen on FactPages ↗