WellplannerNorwegian shelf well data

Fields / Solveig / 16/4-11

16/4-11

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Norway AS with COSLInnovator in Solveig, 07.02.2018 to 01.04.2018 (53 days), to 2 475,0 m in the Rotliegend Group.

Water depth100,0 m
Total depth2 475,0 m MD
Vertical depth2 475,0 m TVD
Bottom-hole temperature94 °C
Max inclination4,8°
Rotary table25,0 m
Formation at total depthRotliegend Group
RigCOSLInnovator
Spud07.02.2018
Completed01.04.2018
OperatorLundin Norway AS
Position58,6711 N, 2,2404 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 125,0 mNordland GpHordaland Group, top 1 010,0 mHordaland GpRogaland Group, top 1 772,0 mRogaland GpShetland Group, top 1 925,0 mHegre Group, top 1 950,0 mHegre GpRotliegend Group, top 2 069,0 mRotliegend GpFormationsUndifferentiated, top 125,0 mUndifferentiatedUtsira Formation, top 760,0 mUtsira FmUndifferentiated, top 922,0 mUndifferentiatedUndifferentiated, top 1 010,0 mSkade Formation, top 1 022,0 mSkade FmNo Formal Name, top 1 188,0 mNo Formal NameNo Formal Name, top 1 329,0 mNo Formal NameNo Formal Name, top 1 613,0 mNo Formal NameBalder Formation, top 1 772,0 mSele Formation, top 1 782,0 mLista Formation, top 1 819,0 mLista FmVåle Formation, top 1 914,0 mEkofisk Formation, top 1 925,0 mSkagerrak Formation, top 1 950,0 mSkagerrak Fm1255001 0001 5002 0002 475

Temperature

Reported at total depth94 °C
Solveig gradient38,7 °C/km
Estimated at total depth from the gradient95 °C

The gradient is the median of 4 released wells in Solveig with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/4-BF-2 Y1H0,3---2026
16/4-BF-2 Y2H0,35 922,0--2026
16/4-BF-4 H0,33 965,0--2025
16/4-U-90,3778,0--2023
16/4-8 S2,02 700,0-1,402014
16/4-U-52,3---2019
16/4-BE-1 H2,33 174,0--2021
16/4-U-32,4775,0--2019

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor36"193,530"195,3-
Surface casing20"409,526"415,01,35 FIT
Pilot hole-475,09 7/8"475,0-
Intermediate13 3/8"1 297,017 1/2"1 315,01,96 LOT
Liner9 5/8"1 921,112 1/4"1 922,01,67 LOT
Open hole-2 474,58 1/2"2 474,5-

Mud weight

18 measurements, one dot each, 1,00 to 1,50 g/cm³ against measured depth, aqua-drill wbm, aquadrill, bentonite spud mud, gel/polymer.

1,01,11,21,31,41,505001 0001 5002 000125,0 m: 1,03 g/cm³, Bentonite Spud Mud194,0 m: 1,05 g/cm³, Bentonite Spud Mud194,0 m: 1,39 g/cm³, Gel/Polymer195,3 m: 1,50 g/cm³, Gel/Polymer195,3 m: 1,03 g/cm³, Bentonite Spud Mud300,0 m: 1,26 g/cm³, Aquadrill398,0 m: 1,39 g/cm³, Gel/Polymer415,0 m: 1,39 g/cm³, Gel/Polymer415,0 m: 1,20 g/cm³, Aquadrill475,0 m: 1,25 g/cm³, Gel/Polymer475,0 m: 1,50 g/cm³, Gel/Polymer723,0 m: 1,20 g/cm³, Aquadrill1 315,0 m: 1,22 g/cm³, Aquadrill1 315,0 m: 1,23 g/cm³, AQUA-DRILL WBM1 555,0 m: 1,35 g/cm³, AQUA-DRILL WBM1 947,0 m: 1,12 g/cm³, AQUA-DRILL WBM2 475,0 m: 1,12 g/cm³, AQUA-DRILL WBM2 475,0 m: 1,17 g/cm³, AQUA-DRILL WBM
Show on the mapOpen on FactPages ↗