WellplannerNorwegian shelf well data

Fields / Hanz / 25/10-8 A

25/10-8 A

Exploration, appraisalPlugged and abandonedDry

Drilled by Esso Exploration and Production Norway A/S with Deepsea Trym in Hanz, 08.04.1997 to 27.04.1997 (19 days), to 3 460,0 m in the Intra Draupne Fm Ss.

Water depth115,0 m
Total depth3 460,0 m MD
Vertical depth2 562,2 m TVD
Bottom-hole temperature-
Max inclination59,0°
Rotary table25,0 m
Formation at total depthIntra Draupne Fm Ss
RigDeepsea Trym
Spud08.04.1997
Completed27.04.1997
OperatorEsso Exploration and Production Norway A/S
Position59,0301 N, 2,2237 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 139,5 mNordland GpHordaland Group, top 850,0 mHordaland GpRogaland Group, top 2 417,0 mRogaland GpShetland Group, top 2 884,0 mShetland GpViking Group, top 3 089,5 mViking GpFormationsUtsira Formation, top 672,0 mNo Formal Name, top 780,0 mSkade Formation, top 850,0 mSkade FmNo Formal Name, top 1 023,0 mSkade Formation, top 1 106,5 mSkade FmNo Formal Name, top 1 237,2 mNo Formal NameGrid Formation, top 1 737,0 mNo Formal Name, top 1 810,0 mNo Formal NameBalder Formation, top 2 417,0 mSele Formation, top 2 505,0 mLista Formation, top 2 584,0 mHeimdal Formation, top 2 662,0 mLista Formation, top 2 759,0 mVåle Formation, top 2 853,0 mEkofisk Formation, top 2 884,0 mTor Formation, top 2 985,5 mDraupne Formation, top 3 089,5 mDraupne FmNo Formal Name, top 3 245,0 mNo Formal NameDraupne Formation, top 3 420,0 m1401 0002 0003 0003 460

Temperature

Reported at total depth-

1 released well in Hanz report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/10-8 same well0,02 653,0-1,751997
25/10-16 A0,83 704,0-1,392018
25/10-16 B0,84 893,0-1,392018
25/10-16 C0,84 405,0-1,412018
25/10-16 S0,82 765,0106 °C1,302018
25/10-U-41,3----
25/10-U-51,3----
25/10-U-61,3----

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"201,036"201,0-
Surface casing13 3/8"1 070,017 1/2"1 080,01,56 LOT
Open hole-3 460,08 1/2"3 460,0-

Mud weight

19 measurements, one dot each, 1,30 to 1,75 g/cm³ against measured depth, low solids, oil based, spud mud.

1,31,41,51,61,71,801 0002 0003 000200,0 m: 1,75 g/cm³, low solids200,0 m: 1,75 g/cm³, spud mud1 034,0 m: 1,75 g/cm³, low solids1 081,0 m: 1,74 g/cm³, oil based1 244,0 m: 1,30 g/cm³, oil based1 939,0 m: 1,30 g/cm³, oil based2 347,0 m: 1,30 g/cm³, oil based2 465,0 m: 1,40 g/cm³, oil based2 943,0 m: 1,30 g/cm³, oil based2 959,0 m: 1,40 g/cm³, oil based3 103,0 m: 1,38 g/cm³, oil based3 110,0 m: 1,38 g/cm³, oil based3 148,0 m: 1,38 g/cm³, oil based3 165,0 m: 1,38 g/cm³, oil based3 202,0 m: 1,38 g/cm³, oil based3 348,0 m: 1,38 g/cm³, oil based3 385,0 m: 1,40 g/cm³, oil based3 460,0 m: 1,38 g/cm³, oil based3 460,0 m: 1,44 g/cm³, oil based
Show on the mapOpen on FactPages ↗