WellplannerNorwegian shelf well data

Fields / 25/11-24

25/11-24

Exploration, wildcatPlugged and abandonedOil

Drilled by Norsk Hydro Petroleum AS with Transocean Winner, 18.02.2007 to 29.03.2007 (39 days), to 2 117,0 m in the Statfjord Group.

Water depth114,0 m
Total depth2 117,0 m MD
Vertical depth2 117,0 m TVD
Bottom-hole temperature81 °C
Max inclination1,2°
Rotary table26,0 m
Formation at total depthStatfjord Group
RigTransocean Winner
Spud18.02.2007
Completed29.03.2007
OperatorNorsk Hydro Petroleum AS
Position59,1035 N, 2,3410 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 140,0 mNordland GpHordaland Group, top 841,0 mHordaland GpRogaland Group, top 1 718,0 mRogaland GpShetland Group, top 1 960,0 mCromer Knoll Group, top 1 997,0 mViking Group, top 2 023,0 mStatfjord Group, top 2 029,0 mStatfjord GpFormationsUtsira Formation, top 723,0 mUtsira FmNo Formal Name, top 794,0 mSkade Formation, top 841,0 mSkade FmNo Formal Name, top 1 006,0 mNo Formal NameSkade Formation, top 1 200,0 mNo Formal Name, top 1 208,0 mNo Formal NameSkade Formation, top 1 344,0 mNo Formal Name, top 1 358,0 mNo Formal NameGrid Formation, top 1 530,0 mNo Formal Name, top 1 534,0 mNo Formal NameBalder Formation, top 1 718,0 mSele Formation, top 1 741,0 mLista Formation, top 1 758,0 mHeimdal Formation, top 1 788,0 mHeimdal FmLista Formation, top 1 927,0 mVåle Formation, top 1 944,0 mTor Formation, top 1 960,0 mRødby Formation, top 1 997,0 mSola Formation, top 2 003,0 mÅsgard Formation, top 2 015,0 mDraupne Formation, top 2 023,0 mDraupne Fm1405001 0001 5002 0002 117

Temperature

Reported at total depth81 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/11-163,01 945,071 °C1,281992
25/11-30 A3,2----
25/11-30 S3,22 606,0--2025
25/11-25 A5,52 448,083 °C1,452008
25/11-25 S5,52 142,077 °C1,472008
25/11-U-465,8180,0--2011
25/11-H-4 AH5,82 393,0--2014
25/11-H-4 BH5,83 825,0--2014

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"219,036"219,0-
Surface casing20"1 101,026"1 106,01,55 LOT
Intermediate9 5/8"1 642,012 1/4"1 650,01,70 LOT
Open hole-2 117,08 1/2"2 117,0-

Mud weight

8 measurements, one dot each, 1,20 to 1,35 g/cm³ against measured depth, water based.

1,21,31,405001 0001 5002 0001 106,0 m: 1,29 g/cm³, WATER BASED1 196,0 m: 1,29 g/cm³, WATER BASED1 650,0 m: 1,35 g/cm³, WATER BASED1 650,0 m: 1,35 g/cm³, WATER BASED1 819,0 m: 1,22 g/cm³, WATER BASED2 003,0 m: 1,22 g/cm³, WATER BASED2 117,0 m: 1,22 g/cm³, WATER BASED2 117,0 m: 1,35 g/cm³, WATER BASED
Show on the mapOpen on FactPages ↗