WellplannerNorwegian shelf well data

Fields / 30/9-23

30/9-23

Exploration, wildcatPlugged and abandonedDry

Drilled by StatoilHydro Petroleum AS with Transocean Winner, 29.07.2009 to 21.08.2009 (23 days), to 2 872,0 m in the Dunlin Group.

Water depth114,0 m
Total depth2 872,0 m MD
Vertical depth2 872,0 m TVD
Bottom-hole temperature-
Max inclination-
Rotary table26,0 m
Formation at total depthDunlin Group
RigTransocean Winner
Spud29.07.2009
Completed21.08.2009
OperatorStatoilHydro Petroleum AS
Position60,4591 N, 2,9855 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 140,0 mNordland GpHordaland Group, top 832,0 mHordaland GpRogaland Group, top 1 860,0 mRogaland GpShetland Group, top 2 119,0 mCromer Knoll Group, top 2 201,0 mViking Group, top 2 214,0 mViking GpBrent Group, top 2 717,0 mBrent GpDunlin Group, top 2 845,0 mFormationsUtsira Formation, top 666,0 mUtsira FmBalder Formation, top 1 860,0 mSele Formation, top 1 940,0 mLista Formation, top 1 990,0 mLista FmVåle Formation, top 2 113,0 mHardråde Formation, top 2 119,0 mRødby Formation, top 2 201,0 mÅsgard Formation, top 2 206,0 mDraupne Formation, top 2 214,0 mSognefjord Formation, top 2 283,0 mHeather Formation, top 2 338,0 mHeather FmFensfjord Formation, top 2 501,0 mFensfjord FmHeather Formation, top 2 668,0 mKrossfjord Formation, top 2 678,0 mNess Formation, top 2 755,0 mEtive Formation, top 2 806,0 mRannoch Formation, top 2 812,0 mOseberg Formation, top 2 814,0 m1405001 0001 5002 0002 5002 875

Temperature

Reported at total depth-

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/7-B-1 AY1H3,05 678,0--2025
31/7-B-1 AY2H3,04 866,0--2025
31/7-B-1 H3,04 356,0--2025
31/7-B-2 H3,06 070,0--2025
31/7-U-13,1983,0--2024
31/7-3 A4,12 863,0-1,512018
31/7-3 S4,12 705,0-1,522018
31/7-14,32 780,0109 °C1,402016

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"189,036"192,0-
Pilot hole-510,09 7/8"510,0-
Surface casing13 3/8"997,017 1/2"1 003,01,64 LOT
Intermediate9 5/8"2 082,012 1/4"2 092,01,72 LOT
Open hole-2 873,08 1/2"2 873,0-

Mud weight

7 measurements, one dot each, 1,20 to 1,43 g/cm³ against measured depth, glydril.

1,21,31,41,505001 0001 5002 0002 5001 003,0 m: 1,35 g/cm³, Glydril1 005,0 m: 1,27 g/cm³, Glydril1 300,0 m: 1,37 g/cm³, Glydril1 955,0 m: 1,40 g/cm³, Glydril2 092,0 m: 1,43 g/cm³, Glydril2 424,0 m: 1,25 g/cm³, Glydril2 873,0 m: 1,25 g/cm³, Glydril
Show on the mapOpen on FactPages ↗