WellplannerNorwegian shelf well data

Fields / 31/1-1

31/1-1

Exploration, wildcatPlugged and abandonedDry

Drilled by Marathon Petroleum Norge AS with Bredford Dolphin, 02.01.2008 to 15.02.2008 (44 days), to 2 920,0 m in the Statfjord Group.

Water depth341,0 m
Total depth2 920,0 m MD
Vertical depth2 920,0 m TVD
Bottom-hole temperature103 °C
Max inclination1,2°
Rotary table25,0 m
Formation at total depthStatfjord Group
RigBredford Dolphin
Spud02.01.2008
Completed15.02.2008
OperatorMarathon Petroleum Norge AS
Position60,8191 N, 3,3150 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 366,0 mNordland GpHordaland Group, top 840,0 mHordaland GpRogaland Group, top 1 669,5 mRogaland GpShetland Group, top 1 993,0 mCromer Knoll Group, top 2 040,0 mViking Group, top 2 051,0 mViking GpBrent Group, top 2 414,5 mBrent GpDunlin Group, top 2 633,5 mDunlin GpStatfjord Group, top 2 881,5 mFormationsUtsira Formation, top 821,5 mUtsira FmBalder Formation, top 1 669,5 mSele Formation, top 1 736,0 mLista Formation, top 1 802,5 mLista FmJorsalfare Formation, top 1 993,0 mDraupne Formation, top 2 051,0 mSognefjord Formation, top 2 055,0 mHeather Formation, top 2 068,0 mHeather FmTarbert Formation, top 2 414,5 mNess Formation, top 2 449,5 mEtive Formation, top 2 514,0 mRannoch Formation, top 2 564,0 mDrake Formation, top 2 633,5 mCook Formation, top 2 690,5 mAmundsen Formation, top 2 767,0 mJohansen Formation, top 2 786,5 mJohansen Fm3665001 0001 5002 0002 5002 920

Temperature

Reported at total depth103 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
31/2-116,01 744,076 °C1,351983
31/2-246,42 588,097 °C1,242023
31/2-U-136,4860,0--2023
31/2-24 A6,4----
31/2-E-4 AY1H7,35 757,0--2015
31/2-E-4 AY2H7,36 039,0--2015
31/2-E-4 AY3H7,35 778,0--2015
31/2-E-4 H7,34 000,0--1995

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"433,036 1/4"433,0-
Surface casing13 3/8"1 208,017 1/2"1 219,0-
Intermediate9 5/8"2 009,012 1/4"2 020,01,49 LOT
Open hole-2 920,08 1/2"2 920,0-

Mud weight

8 measurements, one dot each, 1,20 to 1,30 g/cm³ against measured depth, water based.

1,21,305001 0001 5002 0002 5001 686,0 m: 1,25 g/cm³, water based1 845,0 m: 1,25 g/cm³, water based2 015,0 m: 1,25 g/cm³, water based2 020,0 m: 1,30 g/cm³, water based2 023,0 m: 1,25 g/cm³, water based2 062,0 m: 1,25 g/cm³, water based2 272,0 m: 1,25 g/cm³, water based2 586,0 m: 1,25 g/cm³, water based
Show on the mapOpen on FactPages ↗