WellplannerNorwegian shelf well data

Fields / Byrding / 35/11-13

35/11-13

Exploration, wildcatPlugged and abandonedOil and gas

Drilled by Norsk Hydro Produksjon AS with Deepsea Trym in Byrding, 18.03.2005 to 28.05.2005 (71 days), to 3 291,5 m in the Heather Formation.

Water depth362,0 m
Total depth3 291,5 m MD
Vertical depth3 291,0 m TVD
Bottom-hole temperature122 °C
Max inclination2,0°
Rotary table25,0 m
Formation at total depthHeather Formation
RigDeepsea Trym
Spud18.03.2005
Completed28.05.2005
OperatorNorsk Hydro Produksjon AS
Position61,1623 N, 3,5393 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 386,7 mNordland GpHordaland Group, top 763,0 mHordaland GpRogaland Group, top 1 541,0 mRogaland GpShetland Group, top 1 938,0 mShetland GpCromer Knoll Group, top 2 671,0 mCromer Knoll GpViking Group, top 2 902,0 mViking GpFormationsBalder Formation, top 1 541,0 mLista Formation, top 1 553,0 mSele Formation, top 1 598,0 mSele FmNo Formal Name, top 1 697,0 mLista Formation, top 1 752,0 mVåle Formation, top 1 769,0 mNo Formal Name, top 1 842,0 mVåle Formation, top 1 923,0 mJorsalfare Formation, top 1 938,0 mJorsalfare FmKyrre Formation, top 2 087,5 mKyrre FmTryggvason Formation, top 2 565,0 mBlodøks Formation, top 2 625,5 mSvarte Formation, top 2 646,0 mRødby Formation, top 2 671,0 mÅsgard Formation, top 2 700,0 mÅsgard FmDraupne Formation, top 2 902,0 mDraupne FmHeather Formation, top 3 013,0 mIntra Heather Fm Ss, top 3 096,0 mIntra Heather Fm SsHeather Formation, top 3 206,0 m3875001 0001 5002 0002 5003 0003 292

Temperature

Reported at total depth122 °C

2 released wells in Byrding report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
35/11-14 S1,43 306,0122 °C1,342006
35/11-16 S3,23 554,0118 °C1,392014
35/11-32 S3,73 548,0--2026
35/11-A-33 Y1H3,87 308,0--2017
35/11-A-33 Y2H3,86 994,0--2017
35/11-A-31 AY1H3,85 223,0--2014
35/11-A-31 AY2H3,85 488,0--2014
35/11-A-31 H3,83 562,0--2013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"471,036"474,0-
Surface casing20"695,026"701,01,47 LOT
Intermediate13 3/8"1 751,017 1/2"1 757,01,64 LOT
Intermediate9 5/8"2 924,012 1/4"2 932,01,70 LOT
Liner7"3 290,08 1/2"3 291,0-

Mud weight

15 measurements, one dot each, 1,00 to 1,50 g/cm³ against measured depth, water based.

1,01,11,21,31,41,501 0002 0003 000441,0 m: 1,05 g/cm³, WATER BASED474,0 m: 1,50 g/cm³, WATER BASED701,0 m: 1,20 g/cm³, WATER BASED923,0 m: 1,20 g/cm³, WATER BASED1 500,0 m: 1,30 g/cm³, WATER BASED1 757,0 m: 1,34 g/cm³, WATER BASED1 781,0 m: 1,30 g/cm³, WATER BASED2 554,5 m: 1,30 g/cm³, WATER BASED2 690,0 m: 1,30 g/cm³, WATER BASED2 813,5 m: 1,30 g/cm³, WATER BASED2 932,0 m: 1,30 g/cm³, WATER BASED3 100,0 m: 1,30 g/cm³, WATER BASED3 142,0 m: 1,30 g/cm³, WATER BASED3 290,0 m: 1,10 g/cm³, WATER BASED3 291,0 m: 1,30 g/cm³, WATER BASED
Show on the mapOpen on FactPages ↗