WellplannerNorwegian shelf well data

Fields / 6406/3-12 S

6406/3-12 S

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by Wintershall Dea Norge AS with Transocean Norge, 01.10.2023 to 13.12.2023 (73 days), to 4 785,0 m in the Åre Formation.

Water depth307,6 m
Total depth4 785,0 m MD
Vertical depth4 762,0 m TVD
Bottom-hole temperature157 °C
Max inclination8,0°
Rotary table32,9 m
Formation at total depthÅre Formation
RigTransocean Norge
Spud01.10.2023
Completed13.12.2023
OperatorWintershall Dea Norge AS
Position64,9222 N, 6,7387 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 341,0 mNordland GpHordaland Group, top 1 930,0 mHordaland GpRogaland Group, top 2 352,0 mShetland Group, top 2 479,0 mShetland GpCromer Knoll Group, top 3 398,0 mCromer Knoll GpViking Group, top 4 094,0 mFangst Group, top 4 112,0 mBåt Group, top 4 180,0 mBåt GpFormationsKai Formation, top 1 555,0 mKai FmBrygge Formation, top 1 930,0 mBrygge FmTare Formation, top 2 352,0 mTang Formation, top 2 423,0 mSpringar Formation, top 2 479,0 mSpringar FmNise Formation, top 2 683,0 mNise FmKvitnos Formation, top 2 833,0 mKvitnos FmLysing Formation, top 3 398,0 mLange Formation, top 3 501,0 mLange FmSpekk Formation, top 4 094,0 mMelke Formation, top 4 109,0 mNot Formation, top 4 112,0 mIle Formation, top 4 119,0 mRor Formation, top 4 180,0 mTofte Formation, top 4 221,0 mUndifferentiated, top 4 231,0 mTilje Formation, top 4 317,0 mUndifferentiated, top 4 410,0 mÅre Formation, top 4 464,0 mÅre Fm3411 0002 0003 0004 0004 785

Temperature

Reported at total depth157 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6406/3-U-120,01 310,0--2023
6406/3-11 S0,1550,0-1,392023
6406/3-102,64 600,0161 °C1,762019
6406/3-10 A2,65 190,0-1,732021
6406/3-95,64 183,0145 °C1,792011
6406/3-46,74 414,0-1,701987
6406/3-U-107,71 024,0--2018
6406/3-A-2 H7,85 116,0--2018

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor36"409,042"412,5-
Intermediate20"1 301,026"1 309,01,72 FIT
Intermediate13 3/8"2 094,016"2 105,01,78 LOT
Intermediate9 7/8"4 108,012 1/4"4 115,01,85 FIT
Open hole-4 785,08 1/2"4 785,0-

Mud weight

17 measurements, one dot each, 1,00 to 1,69 g/cm³ against measured depth, innovert, invert, oil base, oil based, water base.

1,01,21,41,601 0002 0003 0004 000412,0 m: 1,06 g/cm³, Water Base428,0 m: 1,39 g/cm³, Water Base1 109,0 m: 1,40 g/cm³, Water Base1 308,0 m: 1,39 g/cm³, Water Base1 364,0 m: 1,50 g/cm³, Oil Base1 598,0 m: 1,52 g/cm³, Oil Base1 926,0 m: 1,55 g/cm³, Oil Base2 105,0 m: 1,57 g/cm³, Oil Base2 125,0 m: 1,69 g/cm³, Oil Base2 158,0 m: 1,69 g/cm³, Invert3 113,0 m: 1,69 g/cm³, Oil Based4 160,0 m: 1,23 g/cm³, Oil Based4 528,0 m: 1,25 g/cm³, Innovert4 533,0 m: 1,42 g/cm³, Innovert4 601,0 m: 1,47 g/cm³, Innovert4 610,0 m: 1,46 g/cm³, Innovert4 785,0 m: 1,46 g/cm³, Innovert
Show on the mapOpen on FactPages ↗