WellplannerNorwegian shelf well data

Fields / 6406/3-10

6406/3-10

Exploration, wildcatPluggedOil

Drilled by Wintershall Norge AS with Scarabeo 8, 08.11.2019 to 05.04.2020 (149 days), to 4 600,0 m in the Åre Formation.

Water depth312,7 m
Total depth4 600,0 m MD
Vertical depth4 600,0 m TVD
Bottom-hole temperature161 °C
Max inclination1,3°
Rotary table34,0 m
Formation at total depthÅre Formation
RigScarabeo 8
Spud08.11.2019
Completed05.04.2020
OperatorWintershall Norge AS
Position64,9378 N, 6,7785 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 346,7 mNordland GpHordaland Group, top 1 968,7 mHordaland GpRogaland Group, top 2 339,7 mShetland Group, top 2 466,7 mShetland GpCromer Knoll Group, top 3 351,7 mCromer Knoll GpViking Group, top 4 031,7 mFangst Group, top 4 064,8 mFangst GpBåt Group, top 4 255,5 mBåt GpFormationsNaust Formation, top 346,7 mNaust FmKai Formation, top 1 546,7 mKai FmBrygge Formation, top 1 968,7 mBrygge FmTare Formation, top 2 339,7 mTang Formation, top 2 405,7 mSpringar Formation, top 2 466,7 mSpringar FmNise Formation, top 2 622,7 mNise FmKvitnos Formation, top 2 810,2 mKvitnos FmLysing Formation, top 3 351,7 mLange Formation, top 3 441,7 mLange FmSpekk Formation, top 4 031,7 mMelke Formation, top 4 044,2 mGarn Formation, top 4 064,8 mNot Formation, top 4 139,7 mIle Formation, top 4 191,7 mRor Formation, top 4 255,5 mTofte Formation, top 4 293,2 mRor Formation, top 4 334,7 mTilje Formation, top 4 386,2 mTilje FmÅre Formation, top 4 533,2 m3471 0002 0003 0004 0004 600

Temperature

Reported at total depth161 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6406/3-10 A same well0,05 190,0-1,732021
6406/3-12 S2,64 785,0157 °C1,692023
6406/3-U-122,61 310,0--2023
6406/3-11 S2,6550,0-1,392023
6406/3-95,54 183,0145 °C1,792011
6406/3-46,94 414,0-1,701987
6406/3-U-37,7570,0--2010
6406/3-87,74 216,0-1,722010

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor36"417,542"419,0-
Surface casing20"1 191,526"1 198,01,88 FIT
Intermediate13 3/8"2 281,517 1/2"2 293,01,95 FIT
Liner9 5/8"4 049,012 1/4"4 058,01,87 FIT
Open hole-4 600,08 1/2"4 600,0-

Mud weight

20 measurements, one dot each, 1,00 to 1,76 g/cm³ against measured depth, innovert, oil, salt base, sea water, water.

1,01,21,41,61,801 0002 0003 0004 0005 000340,0 m: 1,26 g/cm³, INNOVERT360,0 m: 1,02 g/cm³, Sea Water417,0 m: 1,39 g/cm³, Water1 086,0 m: 1,39 g/cm³, Water1 147,0 m: 1,38 g/cm³, Water1 197,0 m: 1,50 g/cm³, Oil1 197,0 m: 1,39 g/cm³, Water1 239,0 m: 1,50 g/cm³, Oil1 786,0 m: 1,52 g/cm³, Oil2 090,0 m: 1,55 g/cm³, Oil2 270,0 m: 1,74 g/cm³, Oil4 055,0 m: 1,76 g/cm³, Oil4 055,0 m: 1,25 g/cm³, Oil4 470,0 m: 1,27 g/cm³, Salt Base4 476,0 m: 1,26 g/cm³, Oil4 476,0 m: 1,27 g/cm³, Salt Base4 534,0 m: 1,25 g/cm³, Oil4 596,0 m: 1,26 g/cm³, INNOVERT4 600,0 m: 1,25 g/cm³, Oil5 037,0 m: 1,02 g/cm³, Sea Water

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
1-14,034,8156417125 149
2-10,329,31569224 604
3-9,518,21494522 542
Show on the mapOpen on FactPages ↗