WellplannerNorwegian shelf well data

Fields / Halten Øst / 6407/6-6

6407/6-6

Exploration, wildcatPlugged and abandonedGas

Drilled by StatoilHydro ASA with Ocean Vanguard in Halten Øst, 02.01.2008 to 05.02.2008 (34 days), to 2 508,0 m in the Tilje Formation.

Water depth226,0 m
Total depth2 508,0 m MD
Vertical depth2 507,0 m TVD
Bottom-hole temperature92 °C
Max inclination3,2°
Rotary table22,0 m
Formation at total depthTilje Formation
RigOcean Vanguard
Spud02.01.2008
Completed05.02.2008
OperatorStatoilHydro ASA
Position64,5913 N, 7,7422 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 248,0 mNordland GpHordaland Group, top 1 245,0 mHordaland GpRogaland Group, top 1 747,0 mRogaland GpShetland Group, top 1 903,0 mShetland GpCromer Knoll Group, top 2 072,0 mViking Group, top 2 101,0 mFangst Group, top 2 109,5 mFangst GpBåt Group, top 2 270,0 mBåt GpFormationsNaust Formation, top 248,0 mNaust FmKai Formation, top 1 094,0 mKai FmBrygge Formation, top 1 245,0 mBrygge FmTare Formation, top 1 747,0 mTare FmTang Formation, top 1 825,0 mTang FmLange Formation, top 2 072,0 mSpekk Formation, top 2 101,0 mGarn Formation, top 2 109,5 mNot Formation, top 2 163,0 mIle Formation, top 2 200,0 mRor Formation, top 2 270,0 mTofte Formation, top 2 294,0 mRor Formation, top 2 355,0 mTofte Formation, top 2 365,0 mRor Formation, top 2 373,0 mTilje Formation, top 2 422,0 mTilje Fm2485001 0001 5002 0002 5002 508

Temperature

Reported at total depth92 °C
Halten Øst gradient38,5 °C/km
Estimated at total depth from the gradient91 °C

The gradient is the median of 6 released wells in Halten Øst with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/6-U-60,0773,0--2008
6407/6-VC-1 H1,93 078,0--2024
6407/6-U-71,9680,0--2023
6407/6-7 S4,43 227,0127 °C1,522009
6407/6-U-24,4437,0--2009
6407/6-44,93 126,0110 °C1,621990
6407/5-2 S6,03 545,0133 °C1,572011
6407/6-56,82 759,0111 °C1,561999

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"296,036"298,0-
Pilot hole-547,09 7/8"547,0-
Surface casing13 3/8"1 054,017 1/2"1 060,01,66 LOT
Surface casing9 5/8"2 056,012 1/4"2 057,01,68 LOT
Open hole-2 508,08 1/2"2 508,0-

Mud weight

12 measurements, one dot each, 1,00 to 1,50 g/cm³ against measured depth, aquadrill, spud mud.

1,01,11,21,31,41,505001 0001 5002 0002 500360,0 m: 1,03 g/cm³, SPUD MUD547,0 m: 1,03 g/cm³, SPUD MUD944,0 m: 1,03 g/cm³, SPUD MUD1 060,0 m: 1,35 g/cm³, SPUD MUD1 136,0 m: 1,35 g/cm³, AQUADRILL1 733,0 m: 1,50 g/cm³, AQUADRILL1 740,0 m: 1,50 g/cm³, AQUADRILL2 057,0 m: 1,50 g/cm³, AQUADRILL2 115,0 m: 1,25 g/cm³, AQUADRILL2 143,0 m: 1,25 g/cm³, AQUADRILL2 204,0 m: 1,25 g/cm³, AQUADRILL2 231,0 m: 1,25 g/cm³, AQUADRILL
Show on the mapOpen on FactPages ↗