WellplannerNorwegian shelf well data

Fields / Mikkel / 6407/6-5

6407/6-5

Exploration, appraisalPlugged and abandonedGas

Drilled by Den norske stats oljeselskap a.s with Byford Dolphin in Mikkel, 15.11.1999 to 27.12.1999 (42 days), to 2 759,0 m in the Tilje Formation.

Water depth225,0 m
Total depth2 759,0 m MD
Vertical depth2 757,5 m TVD
Bottom-hole temperature111 °C
Max inclination5,1°
Rotary table25,0 m
Formation at total depthTilje Formation
RigByford Dolphin
Spud15.11.1999
Completed27.12.1999
OperatorDen norske stats oljeselskap a.s
Position64,6430 N, 7,6677 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 250,0 mNordland GpHordaland Group, top 1 361,5 mHordaland GpRogaland Group, top 1 861,0 mRogaland GpShetland Group, top 2 023,0 mShetland GpCromer Knoll Group, top 2 343,0 mViking Group, top 2 359,0 mFangst Group, top 2 381,0 mFangst GpBåt Group, top 2 558,0 mBåt GpFormationsNaust Formation, top 250,0 mNaust FmKai Formation, top 1 161,0 mKai FmBrygge Formation, top 1 361,5 mBrygge FmTare Formation, top 1 861,0 mTang Formation, top 1 924,0 mTang FmSpekk Formation, top 2 359,0 mMelke Formation, top 2 377,0 mGarn Formation, top 2 381,0 mNot Formation, top 2 444,0 mIle Formation, top 2 485,0 mRor Formation, top 2 558,0 mTofte Formation, top 2 581,0 mRor Formation, top 2 628,0 mTofte Formation, top 2 661,0 mRor Formation, top 2 672,0 mTilje Formation, top 2 709,0 m2505001 0001 5002 0002 5002 759

Temperature

Reported at total depth111 °C
Mikkel gradient36,8 °C/km
Estimated at total depth from the gradient96 °C

The gradient is the median of 3 released wells in Mikkel with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/5-B-1 H0,52 795,0--2020
6407/5-B-3 H0,52 537,0--2002
6407/6-41,93 126,0110 °C1,621990
6407/6-U-66,8773,0--2008
6407/6-66,82 508,092 °C1,502008
6407/6-27,3524,0-1,081985
6407/6-2 R7,3524,0--1986
6407/6-2 R27,3524,0--1986

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"310,036"311,0-
Intermediate13 3/8"421,017 1/2"422,01,28 LOT
Intermediate9 5/8"1 193,012 1/4"1 193,01,63 LOT
Open hole-2 759,08 1/2"2 759,0-

Mud weight

13 measurements, one dot each, 1,20 to 1,56 g/cm³ against measured depth, bentonite/fw, cmc/bentonite, dummy, kcl/pac/xanvis, versavert.

1,21,31,41,51,605001 0001 5002 0002 500423,0 m: 1,25 g/cm³, BENTONITE/FW426,0 m: 1,20 g/cm³, CMC/BENTONITE520,0 m: 1,22 g/cm³, KCL/PAC/XANVIS548,0 m: 1,20 g/cm³, DUMMY1 203,0 m: 1,22 g/cm³, KCL/PAC/XANVIS1 206,0 m: 1,51 g/cm³, KCL/PAC/XANVIS1 850,0 m: 1,56 g/cm³, VERSAVERT2 315,0 m: 1,56 g/cm³, VERSAVERT2 490,0 m: 1,56 g/cm³, VERSAVERT2 545,0 m: 1,56 g/cm³, VERSAVERT2 599,0 m: 1,56 g/cm³, VERSAVERT2 614,0 m: 1,56 g/cm³, VERSAVERT2 759,0 m: 1,56 g/cm³, VERSAVERT
Show on the mapOpen on FactPages ↗