WellplannerNorwegian shelf well data

Fields / Berling / 6506/11-11 S

6506/11-11 S

Exploration, appraisalPlugged and abandonedGas

Drilled by OMV (Norge) AS with DEEPSEA BERGEN decom in Berling, 31.05.2019 to 28.10.2019 (150 days), to 4 443,0 m in the Ror Formation.

Water depth382,0 m
Total depth4 443,0 m MD
Vertical depth4 433,0 m TVD
Bottom-hole temperature-
Max inclination-
Rotary table23,0 m
Formation at total depthRor Formation
RigDEEPSEA BERGEN decom
Spud31.05.2019
Completed28.10.2019
OperatorOMV (Norge) AS
Position65,2029 N, 6,3797 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 405,0 mNordland GpHordaland Group, top 1 933,0 mHordaland GpRogaland Group, top 2 101,0 mShetland Group, top 2 221,0 mShetland GpCromer Knoll Group, top 3 183,0 mCromer Knoll GpFangst Group, top 4 141,0 mFangst GpBåt Group, top 4 357,0 mFormationsNaust Formation, top 552,0 mNaust FmKai Formation, top 1 516,0 mKai FmBrygge Formation, top 1 933,0 mBrygge FmTare Formation, top 2 101,0 mTang Formation, top 2 126,0 mSpringar Formation, top 2 221,0 mSpringar FmNise Formation, top 2 420,0 mKvitnos Formation, top 2 535,0 mKvitnos FmNo Formal Name, top 3 183,0 mLange Formation, top 3 254,0 mLange FmNo Formal Name, top 3 912,0 mNo Formal Name, top 3 952,0 mNo Formal Name, top 4 030,0 mLyr Formation, top 4 116,0 mGarn Formation, top 4 141,0 mIle Formation, top 4 209,0 mIle FmRor Formation, top 4 357,0 mTofte Formation, top 4 393,0 mRor Formation, top 4 399,0 m4051 0002 0003 0004 0004 443

Temperature

Reported at total depth-

No released well in Berling reports a bottom-hole temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6506/11-U-40,91 467,0--2022
6506/11-U-30,91 467,0--2022
6506/11-U-51,9----
6506/11-U-61,9----
6506/11-33,34 350,0127 °C1,931992
6506/11-103,94 536,0-1,982017
6506/11-75,74 977,5175 °C1,972001
6506/11-U-26,3403,0--2007

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"470,036"470,0-
Surface casing20"1 420,026"1 420,01,68 FIT
Intermediate13 3/8"2 618,017 1/2"2 619,01,98 LOT
Intermediate9 5/8"3 810,012 1/4"3 820,02,15 FIT
Liner7"4 432,08 1/2"4 433,0-

Mud weight

29 measurements, one dot each, 1,10 to 1,96 g/cm³ against measured depth, 1.5sg spud / kill mud, 1.5sg spud mud, 1.92 sg obm mw 50, cabr brine, cabr2 brine, glydril wbm, kcl polymer, nacl brine, rheguard obm.

1,11,31,51,71,901 0002 0003 0004 00046,0 m: 1,49 g/cm³, 1.5Sg Spud / Kill Mud110,0 m: 1,49 g/cm³, 1.5Sg Spud Mud110,0 m: 1,29 g/cm³, KCl Polymer509,0 m: 1,34 g/cm³, KCl Polymer613,0 m: 1,30 g/cm³, KCl Polymer953,0 m: 1,39 g/cm³, KCl Polymer1 033,0 m: 1,29 g/cm³, KCl Polymer1 314,0 m: 1,39 g/cm³, KCl Polymer1 426,0 m: 1,39 g/cm³, KCl Polymer1 426,0 m: 1,44 g/cm³, Glydril WBM2 040,0 m: 1,62 g/cm³, Glydril WBM2 625,0 m: 1,62 g/cm³, Glydril WBM2 628,0 m: 1,66 g/cm³, Rheguard OBM2 628,0 m: 1,64 g/cm³, Rheguard OBM3 030,0 m: 1,66 g/cm³, Rheguard OBM3 762,0 m: 1,76 g/cm³, Rheguard OBM3 827,0 m: 1,76 g/cm³, Rheguard OBM3 827,0 m: 1,84 g/cm³, Rheguard OBM3 897,0 m: 1,85 g/cm³, Rheguard OBM4 050,0 m: 1,85 g/cm³, Rheguard OBM4 136,0 m: 1,96 g/cm³, Rheguard OBM4 150,0 m: 1,96 g/cm³, Rheguard OBM4 150,0 m: 1,90 g/cm³, Rheguard OBM4 442,0 m: 1,68 g/cm³, CaBr brine4 442,0 m: 1,91 g/cm³, Rheguard OBM4 442,0 m: 1,64 g/cm³, CaBr2 brine4 443,0 m: 1,91 g/cm³, Rheguard OBM4 443,0 m: 1,14 g/cm³, NaCl brine4 443,0 m: 1,91 g/cm³, 1.92 sg OBM MW 50

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
1------
2------
Show on the mapOpen on FactPages ↗