WellplannerNorwegian shelf well data

Fields / 6506/12-4

6506/12-4

Exploration, wildcatPlugged and abandonedShows

Drilled by Den norske stats oljeselskap a.s with Dyvi Stena, 24.03.1985 to 13.08.1985 (142 days), to 4 457,0 m in the Åre Formation.

Water depth257,0 m
Total depth4 457,0 m MD
Vertical depth4 455,0 m TVD
Bottom-hole temperature155 °C
Max inclination6,0°
Rotary table25,0 m
Formation at total depthÅre Formation
RigDyvi Stena
Spud24.03.1985
Completed13.08.1985
OperatorDen norske stats oljeselskap a.s
Position65,2130 N, 6,7251 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 282,0 mNordland GpHordaland Group, top 1 897,0 mHordaland GpRogaland Group, top 2 065,0 mRogaland GpShetland Group, top 2 211,0 mShetland GpCromer Knoll Group, top 3 132,5 mCromer Knoll GpViking Group, top 3 855,0 mFangst Group, top 3 979,5 mBåt Group, top 4 115,5 mBåt GpFormationsNaust Formation, top 282,0 mNaust FmKai Formation, top 1 470,0 mKai FmBrygge Formation, top 1 897,0 mBrygge FmTare Formation, top 2 065,0 mTang Formation, top 2 171,0 mSpringar Formation, top 2 211,0 mSpringar FmNise Formation, top 2 380,0 mNise FmKvitnos Formation, top 2 600,0 mKvitnos FmLysing Formation, top 3 132,5 mLange Formation, top 3 150,0 mLange FmLyr Formation, top 3 835,0 mSpekk Formation, top 3 855,0 mMelke Formation, top 3 863,0 mGarn Formation, top 3 979,5 mNot Formation, top 4 020,5 mIle Formation, top 4 044,5 mRor Formation, top 4 115,5 mTofte Formation, top 4 168,0 mTilje Formation, top 4 252,0 mTilje FmÅre Formation, top 4 414,0 m2821 0002 0003 0004 0004 457

Temperature

Reported at total depth155 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6506/11-14,24 679,0143 °C1,951987
6506/12-14,94 924,0168 °C1,721984
6506/12-J-3 H5,25 126,0--1999
6506/12-J-2 H5,24 515,0--1999
6506/12-J-4 H5,25 522,0--2000
6506/12-J-1 H5,24 522,0--2007
6506/9-4 A5,34 497,0159 °C1,792018
6506/9-4 S5,34 738,0-1,802018

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"356,036"357,0-
Surface casing20"622,026"680,01,54 LOT
Intermediate13 3/8"2 089,017 1/2"2 107,01,79 LOT
Intermediate9 5/8"3 936,012 1/4"3 955,01,92 LOT
Open hole-4 457,08 1/2"4 457,0-

Mud weight

12 measurements, one dot each, 1,10 to 1,79 g/cm³ against measured depth, water based, waterbased.

1,11,31,51,701 0002 0003 0004 000680,0 m: 1,12 g/cm³, WATERBASED680,0 m: 1,12 g/cm³, WATER BASED1 650,0 m: 1,21 g/cm³, WATERBASED1 650,0 m: 1,21 g/cm³, WATER BASED2 107,0 m: 1,50 g/cm³, WATERBASED2 107,0 m: 1,50 g/cm³, WATER BASED3 950,0 m: 1,73 g/cm³, WATERBASED3 950,0 m: 1,73 g/cm³, WATER BASED3 978,0 m: 1,79 g/cm³, WATERBASED3 978,0 m: 1,79 g/cm³, WATER BASED4 112,0 m: 1,79 g/cm³, WATERBASED4 112,0 m: 1,79 g/cm³, WATER BASED

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 133,0 - 3 150,012,7----
Show on the mapOpen on FactPages ↗