WellplannerNorwegian shelf well data

Fields / Yttergryta / 6507/11-8

6507/11-8

Exploration, wildcatPluggedGas

Drilled by Statoil ASA (old) with Stena Don in Yttergryta, 31.05.2007 to 03.07.2007 (33 days), to 2 773,0 m in the Åre Formation.

Water depth300,5 m
Total depth2 773,0 m MD
Vertical depth2 772,0 m TVD
Bottom-hole temperature97 °C
Max inclination4,2°
Rotary table24,0 m
Formation at total depthÅre Formation
RigStena Don
Spud31.05.2007
Completed03.07.2007
OperatorStatoil ASA (old)
Position65,1116 N, 7,5092 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 324,5 mNordland GpHordaland Group, top 1 762,5 mHordaland GpRogaland Group, top 2 000,0 mRogaland GpShetland Group, top 2 204,5 mShetland GpCromer Knoll Group, top 2 359,0 mViking Group, top 2 373,0 mFangst Group, top 2 416,0 mFangst GpBåt Group, top 2 519,0 mBåt GpFormationsNaust Formation, top 324,5 mNaust FmKai Formation, top 1 399,0 mKai FmBrygge Formation, top 1 762,5 mBrygge FmTare Formation, top 2 000,0 mTang Formation, top 2 059,0 mTang FmNise Formation, top 2 204,5 mNise FmLyr Formation, top 2 359,0 mSpekk Formation, top 2 373,0 mMelke Formation, top 2 391,0 mGarn Formation, top 2 416,0 mNot Formation, top 2 447,0 mIle Formation, top 2 459,0 mRor Formation, top 2 519,0 mTilje Formation, top 2 594,0 mTilje FmÅre Formation, top 2 701,0 m3245001 0001 5002 0002 5002 773

Temperature

Reported at total depth97 °C

1 released well in Yttergryta report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/11-V-1 H0,02 484,0--2008
6507/11-13,83 139,0111 °C1,581981
6507/11-44,43 045,0106 °C1,691987
6507/11-104,62 319,0-1,612010
6507/11-X-3 H5,04 408,0--2000
6507/11-X-2 H5,02 750,0--2000
6507/11-X-4 AH5,03 942,0--2000
6507/11-X-4 H5,03 284,0--2000

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"357,036"360,0-
Surface casing20"494,026"500,01,36 LOT
Intermediate13 3/8"1 790,017 1/2"1 795,0-
Intermediate9 5/8"2 393,012 1/4"2 396,01,37 LOT
Open hole-2 773,08 1/2"2 773,0-

Mud weight

5 measurements, one dot each, 1,10 to 1,30 g/cm³ against measured depth, kcl/polymer, kcl/polymer/glycol, silicate.

1,11,21,305001 0001 5002 0002 500501,0 m: 1,18 g/cm³, SILICATE1 090,0 m: 1,21 g/cm³, SILICATE1 800,0 m: 1,30 g/cm³, SILICATE2 394,0 m: 1,20 g/cm³, KCL/POLYMER2 394,0 m: 1,20 g/cm³, KCL/POLYMER/GLYCOL
Show on the mapOpen on FactPages ↗