WellplannerNorwegian shelf well data

Fields / Skarv / 6507/3-3 A

6507/3-3 A

Exploration, appraisalPlugged and abandonedGas

Drilled by Den norske stats oljeselskap a.s with Byford Dolphin in Skarv, 25.03.1999 to 06.05.1999 (42 days), to 4 528,0 m in the Not Formation.

Water depth391,0 m
Total depth4 528,0 m MD
Vertical depth3 692,5 m TVD
Bottom-hole temperature115 °C
Max inclination-
Rotary table25,0 m
Formation at total depthNot Formation
RigByford Dolphin
Spud25.03.1999
Completed06.05.1999
OperatorDen norske stats oljeselskap a.s
Position65,8010 N, 7,7246 E

Formations

20 tops reported, measured depth in metres.

GroupsNordland Group, top 416,0 mNordland GpHordaland Group, top 1 710,0 mHordaland GpRogaland Group, top 1 933,0 mShetland Group, top 2 048,5 mShetland GpCromer Knoll Group, top 2 655,5 mCromer Knoll GpViking Group, top 3 098,0 mViking GpFangst Group, top 3 789,0 mFangst GpViking Group, top 4 146,5 mViking GpFormationsNaust Formation, top 416,0 mNaust FmKai Formation, top 1 372,0 mKai FmBrygge Formation, top 1 710,0 mBrygge FmTare Formation, top 1 933,0 mTang Formation, top 2 012,0 mSpringar Formation, top 2 048,5 mSpringar FmLange Formation, top 2 655,5 mLange FmSpekk Formation, top 3 098,0 mMelke Formation, top 3 157,5 mMelke FmGarn Formation, top 3 789,0 mNot Formation, top 3 911,0 mNot FmMelke Formation, top 4 146,5 mMelke Fm4161 0002 0003 0004 0004 528

Temperature

Reported at total depth115 °C
Skarv gradient37,2 °C/km
Estimated at total depth from the gradient126 °C

The gradient is the median of 10 released wells in Skarv with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/3-3 same well0,03 830,0135 °C1,501998
6507/3-3 B same well0,04 275,0139 °C1,581999
6507/3-U-30,31 097,0--2010
6507/3-D-2 H0,33 774,0--2010
6507/3-D-3 H0,43 903,0--2010
6507/3-D-4 H0,45 549,0--2020
6507/3-U-22,5---2009
6507/3-72,53 855,0145 °C1,562009

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Intermediate9 5/8"3 752,012 1/4"3 757,01,58 LOT
Open hole-4 528,08 1/2"4 528,0-

Mud weight

10 measurements, one dot each, 1,00 to 1,58 g/cm³ against measured depth, oil based, oil based m, seawater/pa.

1,01,21,41,601 0002 0003 0004 000453,0 m: 1,03 g/cm³, seawater/pa480,5 m: 1,03 g/cm³, seawater/pa673,0 m: 1,03 g/cm³, seawater/pa861,0 m: 1,20 g/cm³, seawater/pa1 270,0 m: 1,21 g/cm³, oil based1 719,0 m: 1,58 g/cm³, oil based1 733,0 m: 1,58 g/cm³, oil based1 785,0 m: 1,50 g/cm³, oil based m3 805,0 m: 1,50 g/cm³, oil based m4 528,0 m: 1,20 g/cm³, oil based m
Show on the mapOpen on FactPages ↗